Search results

Anyone installed an AGR steering box on their rig, browsing looking at their Super Box 2 which is variable 16 to 13:1? Cheers Nobby

Fighting a persistant weep on my heater hose. Can someone confirm that the front cabin heater pipes are 5/8" and 3/4"? The Tee at the top is 3/4 and so the black hose that goes to the smaller pipe is a reduction hose. Anyone got a part number for that I really dont want to screw around with...

Hi, Can somebody do me a favour and snap a picture of the bracket/cables located on the driver side forward rear spring mount on a late 90's Suburban. The E brake cables pass through and mount to this. I reconfigured this to a different cable setup for my rear disc conversion and am making...

Is it possible to R and R the power steering line that loops into the frame rail and back without dismantling radiator and shroud etc? Looks to me like it will not shimmy out of their easily. Well the blown one will LOL but not so sure about getting a new one in? Cheers Nobby

Is it plausible for a leak in the heater core to be showing out of the evaporator drain rather than inside? Cab is dry inside and not really smelling coolant or seeing greasyness but the evap drain tube is dripping coolant. Cheers Nobby

Would this be an LLY rated at 250hp and would the transmission be a 4 speed and hence a 4L85E? (The Dash picture shows 3 and D for the shifter). Would $5000.00 be an OK price for one with 150,000 on the clock and any reason to not to buy one? Cheers Nobby

I just replaced the Tank and Fuel Lines from the Lift Pump back on my Burb: Fuel Tank was a Spectra GM43B and it came with the Metal Baffle Box installed. Fuel Lines were pre-bent from Lines To Go (Lift Pump Back Kit FL507-DD1 for the K series) and were a great match and installed with only one...

Arghh cannot find it, what is the quick IP test, hold throttle at 2000rpm and release, engine stalls bad IP or something like that? Just was sat outside and revving the engine and she stalled out, does not do it every time but its there. Fuel pressure seems good on gauge and fairly fresh...

Can anyone confirm if the part number for the 93 Delphi lift pump has changed? Prior threads list the pump to be a HFP905. However Rockauto and Delphi Online Catalogue now show a FD0009 for the 93. Cheers Nobby

Hopefully, this will kick the likes of GM up the arse and resurrect things! http://www.ramtrucks.com/en/ecodiesel/

Does anyone have any leads on a source for replacement transmission oil cooler lines. Yes I know I can put something together myself but time is off the essence and I suspect mine are on the way out so I wanted to stock something in that I could quickly and easily install when the time comes...

With the impending summer season and hence of course the usual flurry or engine cooling threads just wondering if anyone has any experience input on Evans Coolant? Gotta love the cycle of things, with winter comes 'my truck won't start' and summer 'my truck overheats'. :D Cheers Nobby

Anyone know where i can easily get a replacement block heater cord? Is there a specific name/designation for our style connector, or do you just specify the truck? Cheers Nobby

So today start truck and let it idle for 10 mins. Hop in press brake and have solid pedal couple more presses and correct feel comes back. Pop hood and find fluid level low and evidence that fluid was pushed out of the cap and there was some fresh oil leaked out of one of the capped ports of...

Before I start worrying about this, will a loss of fuel cause the throttle warning light to go on. Going uphill a short steep ramp, fuel tank low I experienced a momentary almost stall, which due to the conditions I very much suspect is due to me pushing the limits of my fuel tank. However I...

What the, 4 Tahoes on ebay currently, one with only 61,000 on it. By the way did they ever put a diesel in the 4 door Tahoe? Cheers Nobby

http://longisland.craigslist.org/cto/1998493136.html Wow that's quite the list of upgrades! WMI and intercooler. Cheers Nobby

So I promised Dracor85 quite awhile ago that I would post pictures of the complete Stainless Steel pre-bent brake line kit that I purchased from Inline Tube to show how accurate they are. Firstly my apologies to him for taking so long. Anyways finally after a line failure I finally got around...

Note: ***This thread has been created at the request of the original Poster in order to not mess up the intended technical content of this thread http://www.thetruckstop.us/forum/showthread.php?t=21858*** -Pepperidge If you are running 3.42 rear on a Suburban and load up regularly then the...

So my truck last night whilst driving revved right up then stalled. Kind of alarming as she dropped down a gear and charged towards the car in front!:eek: Try to start it and it revs up then stalls. I found one other case on this where the PMD was changed with no result which was prophesised...