Search results

Hey all, Sold my old 95 GMC back in 2013. Been without a diesel until a few years ago when we picked up a 2004 Chevy K3500 with a Duramax, to pull our boat. And the pick up being stock, does a great job of pulling our 13,500 pound load through the Oregon hills. Yes, we did it the proper way and...

Is there anybody here that can help a gal out by installing her PMD remote cable? She has all the parts but needs to replace the harness from the back of the IP and isn't sure she can remove the intake and replace the wires. If anybody can help this gal out, it would be great. She is located in...

Hey all, I have a buddy that has a 97 F350 and tried to load a programer on his pick up. The programer refused to load due to a P0603 code. We know that it is a Internal control module KAM error, but have no idea what that meens. Can anyone help please. Thanks, John

Is ther any year of Cummins that will be ill effected by running bio in it? The subject came up today and no one knew so I thought I'd ask the masses here. Thanks, John

I want to convert my SRW K2500 to dually. What all is needed to do this. The pick up is the HD version. Don't really need the 1 ton springs but would like the stability of the duals when towing the 5er. Thanks, John

After looking around and trying the search, there is nothing coming up on removing the badging on the door trim. Does anybody know how those badges are attached. I don't want to just start ripping them off. Thanks all

Our 32'nd DYNO Day event @ Motor Mayhem ---------------------------------------------------------------------------- Attention Diesel Pickups: Dodge Ram Cummins Turbo Diesel, Ford Powerstroke, and IDI, and Chevy Duramax/6.2/6.5 owners… Announcing: Idaho Turbo Diesels 32'nd Diesel Pickup...

I replaced the heads gaskets and heads not long ago. When I replaced the gaskets I had the coolant "shake" in the oil system. When I removed the pass. side valve cover there was 1" of the water/oil "shake" covering the inside of the cover. Had the heads skimmed and pressure tested and all was...

Anybody near McMinnville or Newberg Oregon with the scan tech? I would like to check and set the time on the pick up. John

Good day all, Just wondering if the stainless braided fuel lines can be attached to a barb fitting and clamped with a standard hose clamp? I am just wanting to get this fuel filter in and I can order up the other fittings later. Thanks, John

I am in the process of replacing the fuel filter with a Racor 2xx filter. I got all the parts but the inlet to the IP. Nobody seems to be able to sell me that one fitting. Trying to replace the 1/4" hose barb with a 3/8" inlet. Either a barb or hard line but the hobe barb fitting is in 7/16-20...

As stated above the filter is stuck on. Broke the filter wrench and crushed the filter housing. Need to get this off so I can get the system flushed of coolant. What would be the best way to get that filter off the block. Dang I'm thinking of going back to the gassers more now.:rolleyes5: John

Hey All, I just got done replacing the head gasket on the driver side due to not being tourqed correctly. Went to fire the truck up and found that the cross over is cracked at the bolt tangs on the pass side. Looking for one for a 95. If anyone has one that is spare and don't want an arm and...

Hope all had a great Christmas and have a great New Years, So here's the issues. I replaced the head gaskets on the pick up. Took some time to get up the cash as the heads were cracked(no supprise) and needed replaced. Got two heads from a shop that was new castings with good valves and all...

Well it's time for the oil change again. So off to Wallie's to pick up some of the Shell Rotella T full synthetic and found that they have stopped carrying it. Well the 5w-40 anyways. So without getting into the whole oil debate, I was wanting to know if anyone has experiance with the Shell...

Well time to replace the injectors and I have all the stuff but could use the help of someone that has changed them before. If you live near the McMinnville Oregon area and would like to help I have some deerburgers and some Black Butte Porter for when the job is done. :thumbsup: Anyone want...