Search results

Well guys, my truck has been in total parts for about a month now. I finally got around to putting it all back together tonight, I busted her off and let it warm up some and took it for a spin. I will have to say the first thing I noticed was the exhaust tone. This thing is LOUD!! It sounds just...

Ok guys, I was changing out my rotted out crossover for a new one and I broke all three manifold studs on the drivers side :mad2: Anybody have a good way of getting the old one out? I'm not sure if and easy out will work, maybe just grit my teeth and start drilling them out and re-tapping them?

Ok guys, I've been compiling a bunch of parts for my truck and they all showed up today :thumbsup: I've got a new down pipe and crossover with an ATT and was curious if you guys would heat wrap the DP and crossover before the install? I think I read somewhere that the heat wrap helps spools the...

Ok guys, I've got all of my cooling upgrades done now with the addition of a new radiator also. I took it for about a 30 minute drive, and I can't get it to warm up. It takes about 15 minutes for it to warm at all, and it only come up to the first mark above 160 on the gauge. I've taken it and...

Ok guys, I've got everything all put back together now except for the fan and fan clutch. I want to do the fan clutch mod on it, but I want to make dang sure before I start putting this thing together. So I bend the spring to make the round part longer not shorter right?? And then I RTV the end...

Ok guys, I'm about to change where my pyro probe is. It's in the crossover right now, and I'm curious where everyone is putting theirs at?

Well guys I think I'm going to build me a new engine for my old girl here in a few weeks. I'm going to start with a Teds engine. Anyone around the Tulsa area want to come and help me out :thumbsup:

Ok guys, I was checking things out today and I opened up the coolant res an noticed the coolant was brownish black? I checked the oil level and it wasn't low. It doesn't smell like oil. Is it just rust moving around in the system? It's got me a little uptight now.

Ok guys, I think it's time for alittle bit of lift on my truck. It's a 94 K3500 ext. cab dually. I already have the T-bars turned up some, I'm running 235/85/16. I would like to run a true 33" tire, which I think I could right now. I was thinking about a 2" lift? I was just curious if just...

Ok guys I think it's about time for me to do all the goodie cooling upgrades. I carry around 3,xxx lbs. all day everyday with welder, tools, bottles, etc. I'll also be pulling a travel trailer to and from jobs it weighs right around 11,200 loaded down. I know HO water pump, upgrade fan clutch...

Ok guys, after yesterdays deal with the belt I got out and decided to run around today and I noticed I was running warmer then usual. It usually runs at 180 on my guage now its around 200. If I let it idle or coast it goes to normal, or even alittle cooler. So I'm wondering if my thermostat is...

Ok guys, I went to eat this morning and as I was parking I lost all power steering. I got out and popped the hood and my belt came off. I put it back on and I went in and ate, when I came back out and cranked her up it threw it off again and broke it. So I walked the 4 miles to the nearest parts...

a1customs aka steaksauce WARNING about splayed mains(and other ramblings) staff edit: removed hot link (non vendor link... and we'd rather not see that idiot get web traffic off of this) here is the text: WARNING: Splayed Main Caps Kit. The "splayed main caps" are another sales gimmick...

Ok guys, I was going to check the tranny fluid today and whent I pulled the dipstick out part of the tube came with it. I was curious if anybody knew a parts number for a new tube? It's a 94 K3500 with a 4L80E. It wasn't broken 5,xxx miles ago when I changed my oil, so I'm not worried to bad. I...

I've seen a bunch of guys running a buddy's mutli-tune tuner. I was curious where they got these at and if they are any good or not?

Does anyone have a good drawing of how to build a boost fooler? I've found one on the forum, but it doesn't go into very much detail about how to do it. Thanks for all the help

Ok guys, quick question. I know I need a 3 bar map sensor to keep my truck from coding while running a TM. My question is, does anyone have a parts number for one? Or is it the same as the turbo boost sensor? Thanks guys

Ok guys, I have a question about the turbo master. I've got one for my truck, and I was wondering about after I put it on is there something I need to do with vaccum system? Can I just do a delete and be fine, or do I need to reprogram everything before I put it on? What's the easiest way to get...

Ok guys, my truck died this morning and I checked the fuel filter housing to make sure it had fuel. I found out that it didn't, so I filled it up with diesel and she fired right up until it emptied the bowl out. So i filled it back up and it wouldn't start until I cracked the valve on the...

I changed my glow plug controller a little while ago, and now I'm leaking anti-freeze from right around the area? Any ideas why?