Search results

hey i have a 2003 6.6 durmax will it hurt anything if i change the anti freeze to the old green stuff thanks in advance

hey i just bought a 2003 durmax with 132000km. on it how can i tell in the injectors have been changed thanks 4 any info.

hi when i tried to start truck the starter made loud growling noises but would not turn the motor over pulled starter support bolt was missing one of the 2 bolts holding starter in place had broken off in hole cleared that installed new starter when i tried to start same thing happened have been...

hi all i just took my door off to install new pins and bushings but how do i compress the short spring enough to get it back in place thanks 4 any info.

hi all yesterday all was ok 2day started truck and dash brake light came on stayed on checked master cyl. level ok petal ok brakes firm no sign of leakes thanks in advance this is not the abs lite

hey i have a pmd mounted in bumper im in alberta it gets -40c here will the extreme cold affect it or should i cover or partly cover it 4 some heat thanks in advance

hey i need to replace a ujoint on my front shaft but the slip joint is siezed i got as far as getting the u joint loose but i cannot shorten the shaft if i heat the slip joint will it melt the old grease enough to bang it loose and let it drop or what?? thanks 4 any advice

hey i just installed a new turbo guage tried it out when i walk on it it climbs quickly to btween 10 and 12 is this good average or poor thanks in advance 4 any info.

hey i have a early 1999 4x4 crewcab app 225000km 373 diff's shortbox is my truck capable of towing a 8500 pound 5th wheel live in alberta canada some hills but not like the big ones down south thanks 4 any info

hey anyone ever change this switch early 99 tilt stearing all advice appricated

early 1999 is it hard to change the ignition switch drop the steering then can i get at it ?? thanks 4 nay info.

hey my truck was outside and it was plugged in but i didn't no it wasn't getting power to the blockheater bout 14 hrs. when i got back needles to say it didn't start. today i went back got power to the motor charged the batteries hooked another truck to boost it started once 4 bout 5sec. put...

hey don't no if im in the right spot or not truck started stalling mostly when i apply brake to turn sometimes when i let of the footfeed when have to slow down truck always starts right now wheni statr it and purrs. have had truck 4 , 3 half years since replaced and relocated pmd to front...

hey guys have problem started couple days ago truck quit while driving shut off key tried restart started then quit in bout 2 seconds did this couple times then i noticed when i turned key on the engine light and the wait to start lite were very dim then faded out turned key off and on few times...

hey can a guy take this valve off and clean it with varisol or something else or do i have to buy a new one thanks for any info.

hey anyone tell me about the insulation under the hood is it there to help keep the noise down or if i remove it will it help keep the temp. down under the hood let the pmd run cooler thanks 4 any info.

i don't know if im in the right place or not but need some advice early 1999 4x4 2500hd 2100000km. my exhaust was altered when i bought the truck it has stock down pipe on it then is 4in. all the way to the end with a muffler but no cat does it make any or much difference without the cat. and...

hi my front shaft is seized up at the slip joint what is the best way to get it loose thanks

hey i recently started using rotella 5/40 syn. how long can run it btween changes.i was just now told to remove the 5/40 and go back to and stay with 15/40 as that is all that is recommeded for the 6.5 as it has a turbo this seems awful strange to me anyone tell me the change miles and the...

hey canadians did u know we can get the same comp. reflash as the big guys sel they are reflashed right here in alberta at www.westers garage.com in tilley alberta check it out they sell to a lot of the big suppliers in the u.s.a. only a lot cheaper