Search results

Truck only has around 68k miles on it. Braces have been on it for 40k. Should i take it all off and get new pitman arm and idler and braces?

Everytime i hit the gas hard from a redlight it makes alot of metal popping noise, doesnt slow down it just gets really loud popping. I thought it was the exhaust rattling but it also has slack between reverse and forward.. This is with 60k miles on it. :mad2: Ideas?

I'm going to do a 1inch block and new mud tires or either stuff some 33's on it how it is. This is how it is now. This is what it was. Pick what ya'll think i should do.

I think my bearings are out. I got 70k miles and i hear sqeeking in the front end of my truck on both sides. I jacked up the front tire and can kinda wobble it inside and out the fender. What yall think? and how hard is it to do?

http://www.summitracing.com/parts/PPP-20-265S I want some but i want to see them at night first.. I think they have LEDs going all the way across the middle one.

I lifted my gmc bumper so i could cut that ugly plastic piece out... Got a shit load of washers and longer bolts. Cut brackets to clear frame and cut the plastic.. was a pain in the ass.

New fad from cali. Think i might do mine like that. ):h Put all that work in powdercoating, lift and paint then put little tires on it.

Im thinking about getting a new grille. Pic one.

How does a tundra keep up with me with my tune on 160? We were going down the interstate and i couldnt pull away until he topped out each time. :mad2:

I want to either lift my truck 4 inches or bring it back to stock and make it go fast... If i brought it back to stock and got smaller tires it would get better mileage and the cv shafts would be straight. If i lifted it i would have to get bigger tires and get worse mileage and cvs would be...

Anyone going? its this weekend.

I finally got my adapter to pull my camper with my gooseneck. I figured i was going to have to lift the camper to pull it, but it works for now i think. They want me to weld drop brackets on the leafs instead of flipping the axles. Is that the way to go?

My stepdad wants to race all of a sudden. Some guy that works at the dealership supposedly programed his truck for 140 extra horses and its guaranteed to get 20mpg. Its a 08 LMM with 20's and 34s. Im going to set the ppe on 160 and getting the straight pipe before we go. What yall think?

We got a diesel mule that runs great till you go far. It runs flat out then just putters slowly down to a crawl. I changed fuel filter and it still does it. Any ideas?

My friend has a old Arkansas state police crown vic. We left my driveway and i saw the moisture come out his exhaust when he floored it. So i put it to the floor and stayed behind him till about 80 and let off. :devil: Had the POS superchip on performance. Waiting on Nick for my PPE:o16:

Anyone have one? $518 for all this 2006-2007 LBZ: +270 HP / +349 lb FT, Six power levels, Speedo correction, Speed limiter removal, +2-3 mpg, DTC code reading, Gear Ratio Adjustment and Defueled Shift Option Power Levels (LBZ): 1. +50hp - +97 lb.ft. 2. +90hp - +160 lb.ft. 3. +120hp -...

I went to scrapin the coast in ms. 10 dollars to run as much as you want. First pass in 4x4 i got a 15.7 in the 1/4 I had a .6 reaction time :D Got spanked by a 700hp dodge. I was wheel hopping really bad too. I guess i need to lower my torsion bars next time?

It had like 5000 horsepower... Not really. but i didnt kno he was racing and my truck is set on stock... wasnt much of a race though. He will go tell his buddys he almost beat a twin turbo duramax with 1000lbs of torque and 600hp. :svengo:

Was just cruisin to the equipment to fill them up with my 200 gal tank full and found a stump hole that was covered up. SUNK 12k winch was already burned up so i was screwed. Had to get my buddy in his powerstroke to pull me out. He bearly got it out.

Anyone do video editing? What do you use? I use the windows movie maker and some conversion programs to get it to the right format. I record the videos with my cell phone and this is what i come up with. http://www.youtube.com/watch?v=ZZWk6gPnAS0 http://www.youtube.com/watch?v=txhjPp8IuOA