• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. Bammer

    Rubbing noise, can't find whats causing it? HELP !

    2007 Classic, 4x4 running 265's. Noticed a rubbing noise (like something rubbing against the brake dust shield) when making a right turn only. I checked the front end, wheel bearings are tight, ball joints seem ok, brakes are good and functioning properly and dust shield isn't tweaked or bent...
  2. Bammer

    AC went crazy yesterday??

    I have already had the plug and resistor thing done to my truck after I lost a few speeds on the dial, and all has been well for the past 2 years. Yesterday, after running back from upstate NY (about 4 hours) with the ac on I stopped home for an hour, took a 35 minute ride with AC on, stopped...
  3. Bammer

    Haulin wood!

    8 - 10 loads a year, travel about 80 miles. Don't know it's there!
  4. Bammer

    Rotor removal rant

    Let me start off by saying I am no mechanical guru, but nor am I a stranger to getting my hands dirty and "doing" it. But after today I am ready to turn in my man-card and join the manicured handed yuppie nation! I have a ABS sensor that has some crud under it that throws it out of range...
  5. Bammer

    Brake pedal goes limp when truck downshifts to first gear.

    Brakes pedal is firm and braking action is great ,until coming to a stop. No issues until almost to a stop,truck (automatic) shifts to first and the pedal gets loose and I have to give the pedal a harder push or let off and reapply and it's ok. Pads are good, what can it be?
  6. Bammer

    Heater/AC control

    Twisted the fan contril knob to turn on the AC yesterday and at the #3 position I got no fan or AC, 1,2,4,5 positions give the right fan speed and kicks on the AC. I assume it's just a bad connection. My wife thinks it's OK, but I don't! Anyone know of a cheap place to get a new one? Are these...
  7. Bammer

    Caliper rattle??

    Just starting to notice a rattle when hitting bumps,more rapid of a rattle over stutter type bumps,less over normal road imperfections. I have looked and touched anything and everything that could be loose and have found nothing! Steering shaft is the upgraded one and is tight, all body...
  8. Bammer

    Code P0403 on a 07 LBZ

    07 LBZ, just turned 50k. CEL light came on after a fill up, checked with scan gauge and found code P0403 which is EGR solenoid control circuit. I cleared it and it has stayed out for 1 trip of about 8 miles. Any thoughts? Thanks
  9. Bammer

    Outer body rust through warranty

    Does that warranty apply to bumpers also? Rear bumper, driver side upper corner is starting to flake and rust is popping through, totally absurd to be doing so on a truck that turns 3 in May! :nono: It's not horrible but I am going to try and get GM to cough up a new one,just wondering if I...
  10. Bammer

    dash vibration @1500 rpm

    Now that the cold weather has been upon us my dash is making more noise. It's most bothersome when the engine is at 1500 rpm. Goes away for the most part above and below that rpm. Seems almost dead center,maybe favor the passenger side some,gets a bit less when the heats been on for a while...
  11. Bammer

    Tow mirrors

    Anybody buy them from Rock auto ?? I can get a manual set(no power) for 166 bucks delivered! Are they any good?
  12. Bammer

    Dash light out~HELP

    The light behind the passenger side dual climate control switch is out,my wife whips the lever up and down like a brute! Hence the reason both are out on her Impala. Well I just surpassed 36k,so bumper to bumper warranty won't cover it. Can it be changed relatively easy??
  13. Bammer

    SS Step bars,too good to be true?

    Check these out,only 110 bucks...Hmmm,what do you think...
  14. Bammer

    Wireless internet

    Driving down to FL in May,well lets say the wife will be doing most of the driving,her car! ):h I did the trip last year in the truck SO I am going to have some free time and thought about getting wireless internet for the laptop' questions arise; 1. Will it work down 1-95 from CT to FL...
  15. Bammer

    Condensation!

    I have a 07 CC with manual windows. Window can be dry as a bone,I roll it down and then back up and it's soaked ! I have had this happen in summer and winter. I am now worried that my doors maybe rotting from inside out?? I checked the bottom of the doors and can see the drain holes are...
  16. Bammer

    Who's been riding??

    Still waiting for NY trails to open and not enough white gold in Maine to make the 8 hour trip so, Any of you out there got rideable snow?? I need a fix bad!! Post a pic so I can live vicariously through you..:D
  17. Bammer

    Whats the best to clean and protect these with?

    Just got these,what do you guys use for a cleaner and polish?? Don't wanna mess em up!
  18. Bammer

    Hi

    Just signed up and wanted to say hello.....Hello I'll be cruising the site and getting comfortable.. Cya round the store all.
Back
Top