Search results

So my truck has been stalling. When it first happened I thought I had a plugged fuel filter so I installed a new one and it started right up after I bled the system. Went to drive it again and it stalled on me again. Bled the fuel system and it started right up. Next time I started the truck I...

How much does a torsion bar move up and down? I realize they are supposed to twist but how far do they move up and down when the suspenion cycles? the reason I ask is I just installed an Walbro FRC-10 with one of pmdcable's brackets and the fuel inlet is resting just underneath the torsion bar...

The truck will shake kinda like someone hit your bumper slightly in a parking lot and a puff/haze of black smoke will come out of the tailpipe a second later. No ses light has come on and the truck drives like normal. It happens in park and in gear and the tach doesnt move. It doesnt happen...

Currently I have 265/75/16 uniroyal liberators a/t that are almost worn all the way. Im going to college in Maine in the fall and going to Canada for a fishing trip in a week so my driving is going to switch from mostly in town to mostly on the highway and in the woods. My question is would...

Recently the truck after traveling at higher speeds (60 mph+) the cruise control will kick on by itself after I have took my foot off the pedal. This only happens when I let the truck slow down without the brakes and the cruise control switch is on the on position. I will add that during the...

its a similar turbo to the 6.0 liter powerstroke turbos except not vgt just wastegated and it came off of a 7.6 liter diesel engine. the compressor has a .58 A/R and turbine has .89 A/R. ands its T4 with 4 inch turbine outlet snd .56 trim. Any opinions if this would be a good turbo for a maxed...

I saw this today and it is a valve basically designed to help dual scroll turbos spool better. Im thinking since the ATT is a dual scroll im pretty sure wouldnt this help the slight lag it has compared to a GM X series turbo? What are your thoughts on it?

So i went to clean my battery connections because ive been chasing a clicking sound when i go to start the truck but after a few clicks it eventually starts to crank. so i went to clean my batt connections and this copper colored stuff is on some of my battery connections. i was wondering if...

Where have you guys bought your genuine Bosch marine nozzles except from Heath?

I know some people have expressed doubts on the accuracy of info using snap on scan tools so i was wondering if tdc offset was one of these. I took my truck in to my autos class for a code and when i was looking at the tdc offset and it was at -2.46. new injection pump was put on at chevy...

My passenger side is blown and the drivers side is starting to sound fuzzy any good cheap options to consider. im looking at these and i got the stock headunit http://www.bestbuy.com/site/Pioneer+-+4%22+x+6%22+3-Way+Car+Speakers+(Pair)/8208361.p?id=1165610947779&skuId=8208361...

What are your thought about adding a second stock lift pump inline with the other one already there. My uncle works at the parts store so i can get them pretty cheap. I already got the FTB

so what would be a good leveling kit for my truck that could clear 285s without rubbing. just wondering if i would need new shocks? thanks

no codes it just spradically been happening for the last three months. during light braking the pedal will pulse like im on ice or snow. then my reaction is to quickly get off the pedal then i reapply it and everything is fine. brakes are all under a year old all the way around and resovior is...

i got a semi floating 9.5 inch 14 bolt with the G80 under my truck. doing the fluid and im wondering which one should i fill the diff with. on alldata theres two specs. just one for the rear axle which is 80w90 and one for a locking diff which is 75w140. can someone eleivate my confusion. thanks

I feel stupid asking this becasue i can do it really easy on my grandpa's gmt-800 truck but how do you undo the glovebox to get to the ecm. Im going to break some plastic pieces if I keep trying to get it out. I need to get the ecm out because im going to get the kojo tune.

so i got a flowmaster crossover that im going to install but it didnt come with any parts. what do i need to finish the job.

P400 Block with concrete in lower cooling passages and girdle, pensuilar forged crankshaft, Mahle Monotherm steel pistons, custom forged rods, ported and polished heads with similar valvetrain to mikey von's and bored out precups. all topped off with inline injection pump, custom injectors, and...

so my driversides back window broke so im trying to tape it but duct tape wont work. know anything tape that will keep a window on by sticking to the interior plastic?

anybody know if it would be possible to shoehorn some bigger plungers in there