Search results

Hey guys I'm needing some good sound advice. The sight has not let me down yet. I have a 2003 GMC 2500 hd duramax and the transfer case seems to stay lock in. The drive shaft does not turn freely, I disconnected the front drive shaft and the axle is not lock in. When I do try to go in 4hi I...

Okay guys needing to get some tires for my 2005 dually. I have been running 235/85/16 tires on the last three sets. Have not had any rubbing issue with anything i have haul. I am looking at putting a little wider tire on like a 265/75/16 tire. Will i have a rubbing issue and need to go with...

Well guys, my sons 2003 gmc 2500HD crank broke about 2 1/2 weeks ago. Just got running again. My million dollar question is what causing these??? Ive heard a lot of different answers, so I thought I would ask my friends here.

Hello guys need some help on this situation. 2003 duramax crew cab that we just got, we are getting drivers door and a left rear door ajar indicator on the dash. The truck was a farm truck, could tell when i pull the panels off. i try cleaning the switches but did not work. GM says to replace...

My son is looking a GMC 2004 duramax 1owner. it is a very clean truck inside and out but the vehicle has 376,000 miles. They are asking 6500 for the truck. The truck all stock no add ons. What is everyone opinions on this truck with mileage and price? I know the trucks can run a lot more...

hey good people of the truck stop, I'm getting a dtc code 36 injection pulse error time long. Should I start with a new pmd? I have the pmd relocated behind the front bumper already. Any suggestions? Thanks David

Okay guys, need some help. I have got a check engine light twice now with a P0046 boost control solenoid code. the truck seems to be running good. I clear the code and it came back after driving about 30miles, clear the code again. Any suggestions on diag. this code? The truck is a 2005 with...

My son took over old faithful, on cool and cold mornings the truck will start with no problem even on the coldest days this past winter with out plugging in. The truck will start run for a few mins then die, then need to cycle the switch a couple times and will start right back up. After 3-4...

I was just wondering how the boost controller actually work. The connector shows having power, is that power coming from pcm? Does the pcm telling it to come on and off? Does the power shut off once it reaches boost. How does the vacuum work in relation to the boost controller? Soory for...

I know this may be a old subject, but I'm looking for info on doing a high idle on my 95 truck. I'm trying to find a part number for the wire pin that goes into the connector of the pcm. Any help would be appreciated. Thanks

Hey guys Im looking for a seal kit for the FFM's. I believe i have a leak at my FFM from the bottom side, check fuel lines to make sure they are tight. Has anyone here try to install reseal kit or is it better to get a another FFM. Any suggestions is greatly appreciated. P.S. I have seen a...

Ok guys i need some advise, I have a 2005 duramax with 89,000 miles. No mods right now except for exhaust and guages. I am stuck in St Louis right now with a check light on, the truck is missing real bad and had a P1249. At this point in time I had it towed to Lou Fusz Chevrolet for monday to...

Well guys I switch to a duramax this week. Found a clean one owner 2005 1 ton dually crew cab 4x4 fully loaded with 73k. Question what are the 95 6.5td going for now days, my old one is 2wd crew cab, cloth interior, 194k miles, 3inch down pipe, 4 inch exhaust, leroy's pmd relocation kit...

Well my fuel guage is reading erratic at times and it started to miss under a load, although under a miss i can shift to nuetral and it will go away and free rev with out any problem. I have change the fuel filter and it seem to help but i had to clean the fuel filter canister. The missing...

Ok here is the latest problem I have been trying to figure out. All of my interior light do not work, as soon as you put a new fuse in, it blows before you can get it all the way in. I have try unplugging dome lights and vanity lights but still blows fuse. With this happing i believe it must...

Hello guys, its been a rough past year. Recently I had a rocker arm come loose, found it on the back cylinder of drivers side. The truck started popping through the intake when I was pulling out of the parking lot. Idle the truck across the street and turn it off, towed it to the shop. Back...

Ok I see different places for the egt, pre turbo and post turbo. I have a place for in my down pipe already but if I decide to go pre tubo what is the best place and do you all have any pictures of this. Thanks

Ok, I need some advise please, I got home and was backing into the drive than I heard a big pop and now I have no reverse. I have foward gears still, including low gear. The transmission has been shifting good have strong shifts into all gears. I have been servicing the transmission every...

Need some advise, the truck lost alittle power on the way home and check engine light came on then went back out. Ran codes when I got home and here is what it gave me, " 29, 35, 49, 78". I cleared the codes and have not come back yet. Did not loose alot of power just felt sluggish. Thanks...

Sorry if this is a old topic, but lets talk guages. I am looking at some Glow Shift guages can anyone tell me about them? Or should I just go with the old faithful auto meter guages? Going on a 6.5 td A-pillar mount.