Search results

Does any one know the torque specs for the front shocks, Chilton's book gives a force of 60 ft.lbs (90Nm) up to 93 models, I have a 95-k1500-8 lug. Thanks in advance...

Hey, Veg_Out / Slim, have you considered to make a heat shield for the ATT....? Well,, I would like one...:D

A Pittman arm removal - re-placement.. I've hear rumours it should be left to the mechanic coz its it a PITA. your views on this would be thankful....

To Slim and his Merry Men...:thumbsup: Should of sent this out a week ago but we are preparing for our long journey to Italy at Easter.. Like many others here at DTR my word of thanks to all that's had a part in this project not forgetting those that are convincing others the ATT is a...

I've damaged the rubber boot on the front CV axle shaft nearest the wheel. Looks like I've pinched it as the grease is oozing out with the top of the beaker bar when i was removing the hub assy. Is it worth trying to repair it if so what would be the best way,I was thinking from the inside...

Just brought a garage jack were as before used one of those small round hydraulic ones and lifted the truck one side a time. Where is the most sensible part to place it when lifting up the front at the front on a 4x4.

Hi, Has any one of you have or tried this digital diesel compression test kit. http://www.sjdiscounttools.com/mitmv5535.html With thanks /Paul Edit: couldn't find one from our vendors.. __________________

Hi, Has any one of you have or tried this digital diesel compression test kit. http://www.sjdiscounttools.com/mitmv5535.html With thanks /Paul Edit: couldn't fined one from our vendors..

There is a guy over here says its best to makes larger holes in the Cylinder Head Gasket that are face to face to the cooling channels as they are under dimensioned,as these 6 small holes can get block with un-clean cooling fluid. Has anyone at DTR done this mod to those 6 small holes? He...

At last I've manage to remove the front rotors after using an electrical bolt heat that warms them up nearly white hot in an instant, welded new nuts on their heads but two of them I had to use a Dremel grinder plus drilling on those 4x15mm bolts.... I started to wonder what comes after Red...

I hope you help me out here, the new solenoid # 24210864 TCC PWM that i ordered measures 10.3 Ohms more or lest the same as the old one, understanding from a Component Resistance Chart i have it should be between 20-40 Ohms. Have got a bad egg..? Thanks for any help. /Paul

What do you think..does anybody use it this way..?:confused: Compressed air is your tire’s worst enemy. Air is about 78% nitrogen, 21% oxygen, and 1% other. Nitrogen is inert, non combustible and non corrosive. Oxygen, on the other hand, is immensely destructive to rubber and other tire...

I`m trying to find out the thickness of the shim washer AMG use on the sp. sensor that goes in the Transfer Case, that chuck at FlashOffroad has on that site,, any body.. i have been trying for weeks,,, e- mailing , PM ing , Mike L. were are you now.. bla, bla,, Ssshit HELP...:eek: Own...

The goods have arrived from across the Pond and there at the Customs to have their 25% tax put on them..ouch...but it`s cheaper this way... How do i remove the TCC Solenoid from the 4L80E, there seems to be clip at the back do i need Sp. Tools or just slim fingers & good eye sight. Many...

You Guys & Ladies living in the northern hemisphere in this snowy / icy weather, what air pressure are you putting in your tyres / tiers these days i`m running on 265/75`s for a Suburban..

Here Goes.. I am thinking..(ok, it`s not easy) of buying some parts from Transmission Exchange Co,, Solenoids, bla, bla, for the 4L80E. Has any one been there...as my oldest son is over in San Antonio Texas to the Southwest Research Institute next month for the company he works for, so if...

Hi to All... Has anybody have any idea what this is for... looks like a relay be hide the glove compartment on the left side it sits on a metal bracket together with 2 harnesses by it`s side with a #12077864 H00... Thank`s once again.... /Paul

A little late in the day ...for those of you that have the GMTDScan Tech from EnghMotors there is a new version, ready to down load.. Would be really nice if Stefan could get the ABS program finished....

May-B this shouldn`t B here... But how often should the the Bolt that sits through the pin for the spider gear shaft B replaced, in the B -axel, they are telling me here every 60,000 Km.(37mil) i`ve just changed mine for safety reasons after 205,000Km (127mil) and there`s just a sign of a small...

Hi to all... Still having problem with the ABS it`s throwing a DTC-68 Transmission Component Slipping.. What does this mean & what do i need to do so i`ll be happy again... Thanks Guy`s