• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

What did you do with your GMT400 today...or yesterday....

Door sticker says 245/75R/16s
With the 285/75R/16s I had to turn the torsion bars way up to keep the 285s from rubbing on the back corner of the fender wells.
I’m afraid that the 265s would do the same.
I want to get the ride height back down to stock.
Plus, narrower tire makes for better traction too.
235/85s are the same height as the 265/75s
 
Replaced rear sway bar bushings on the 2014 4Runner before it leaves for Montana tomorrow. That truck is running nice and tight and the mileage returned to normal after replacing the MAF sensor.

Doing some planning and I will head up to Montana 3/20 and 3/21 for 3 weeks. Will be hauling my stainless work tables/cabinets. Measured up and I will pull the 2nd row seat and place the bench part on top of the cabinet, which will allow the cabinet to slide in far enough for the barn doors to close.
 
Back
Top