MrMarty51
Well-Known Member
I went back to the list of all items for sale and could not find them.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Lower Intake Thread Repair Solutions.
- Thread starter Paveltolz
- Start date
Paveltolz
Доверяй, но проверяй
The Time-Serts arrived and they worked just fine.
A little different in style/construct but they threaded in as hoped.
The Senmmonn inserts have a wider lip than the Time-serts and, having already prepared the intake for the Senmmonns, the Time-serts seated a little deeper but, that’s fine.
Senmmonn (later removed in favor of the Time-Sert
Time-Sert
Heli / Perma-Coil. This one was previously installed years ago and remains.
Using the OEM upper as a guide for drilling, the holes are plumb and the intake will be ready for use after the bolt hole is fixed. The studs look a little off given the affects of using close focus.
Aaaand, true to form. After all this time, money and hoopla is finally done… look what I found while re-organizing my tool chest.
Yup…the missing M8 x 1.5 Heli Coil kit was ‘hiding’ on a cluttered shelf, under a tossed rag, waiting for use when I got done with the original project of replacing the injector return hoses. I knew I’d seen them somewhere…old-Heimers and one big, serious face palm here.
But before I get dog piled upon by you my friends, I seem to recall finding a return hose kit under some stashed parts in the back of someone’s Burb a couple of years ago….
”[Things] happen,” eh?
A little different in style/construct but they threaded in as hoped.
The Senmmonn inserts have a wider lip than the Time-serts and, having already prepared the intake for the Senmmonns, the Time-serts seated a little deeper but, that’s fine.
Senmmonn (later removed in favor of the Time-Sert
Time-Sert
Heli / Perma-Coil. This one was previously installed years ago and remains.
Using the OEM upper as a guide for drilling, the holes are plumb and the intake will be ready for use after the bolt hole is fixed. The studs look a little off given the affects of using close focus.
Aaaand, true to form. After all this time, money and hoopla is finally done… look what I found while re-organizing my tool chest.
Yup…the missing M8 x 1.5 Heli Coil kit was ‘hiding’ on a cluttered shelf, under a tossed rag, waiting for use when I got done with the original project of replacing the injector return hoses. I knew I’d seen them somewhere…old-Heimers and one big, serious face palm here.
But before I get dog piled upon by you my friends, I seem to recall finding a return hose kit under some stashed parts in the back of someone’s Burb a couple of years ago….
”[Things] happen,” eh?
ak diesel driver
6.5 driver
LoL