FellowTraveler
Well-Known Member
Cut off wheel or machine shop?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
It is the input shaft on the NP241c from the output of the 47/48re Hybrid 4x4 O/D unit which is shorter than the 47rh 4x4 O/D unit plus a 3/8" clocking ring because there in not enough area for me to slot the 47/48 re 4x4 O/D unit 5th bolt too match and bolt the NP241c to it. Ideally a Dodge NP241 DLD front case half would be great because I could use an off the shelf 4 5/16" shaft but I've had trouble finding one...Cut off wheel with a thin disc, or a diamond/carbide blade in a cutoff saw. Then use a grinder to bevel and deburr. What are you shortening and why?
It is the actual size I need to reduce as the images are all above 5MB each...in office 10 I could just open in office and resize crop or whatever w/o hastles...From the computer, i save images to the desk top, then, at the bottom of the reply box, there is an attach files button, click that, make sure the file location on the popup is set to desk top then click the file and then it should take off from there, although I might be missing a step or three. LOL
From the phone I click the attach files box, then it gives a choice from the photos gallery or take a picture, I always take the pic before hand so I click from the gallery, then tap which photo to attach and letter rip. LOL more than one photo can be selected but I like to keep it more simple and download one at a time before choosing another one, then, after they are all down loaded tap or click full image cause thumb nail always makes it a full image anyways. LOL
I am looking at a newer phone now...It does it automatically from my phone