Will L.
Well-Known Member
Have him post pics of how the adapter and sending unit fit in there.
The crappy intake manifold on hummers/ van is way worse.
The crappy intake manifold on hummers/ van is way worse.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Ds4 fitting for fuel pressure gauge
- Thread starter Will L.
- Start date
Big T
Well-Known Member
I’ll ask him when he texts me how it ran. I think he took the family to the beach after he installed the new sender in the tank.
Will L.
Well-Known Member
Long term the one leroy sells is better- but pricey. But the new one should last for 20 years- that was pretty bad after just a few
jrsavoie
Recruit
Do you have a link to that?OK we installed the gauge on the ‘94:
- YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.youtube.com
He’ll get around to permanently mounting the pod. Used the “T” fitting from Mod Mafia.
Big T
Well-Known Member
That was the link, but here in different form:
[https://youtube.com/shorts/ReMS43mPSvY?feature=share]
jrsavoie
Recruit
Fuel Pressure Tap (FPT)
This item makes it very easy to add a fuel pressure gauge to your 6.5 equipped vehicle.
modmafia.com
Big T
Well-Known Member
Fuel Pressure Tap (FPT)
This item makes it very easy to add a fuel pressure gauge to your 6.5 equipped vehicle.
Sorry, thought you were referencing the youtube video link.
Cost for the fuel pressure gauge set up was not bad.
Gauge: $89.99 for the analog only version, includes sender. It jumps to $129.99 for the analog plus digital. Never have been a fan of digital.
Gauge Pod: $12.99
Mod Mafia T fitting: $30
Colby did the install. I'm waiting to hear back how it's running after he changed out the fuel sender/pick-up in the tank. Sender was very corroded after just 4 years in there, thought it sat for 3 years with a full tank. It seemed to be running well, this on Marty's IP, but until it's road tested......
SnowDrift
Ultra Conservative. ULTRA!
- Staff
- #29
If that one works, I could use it.
DieselAmateur
She ain't revved 'til the rods are thrown...
The DS4 inlet fitting isn't -AN, it's a 7/16 ORB fitting if memory serves. It screws into another larger fitting on the pump that I think houses the inlet screen. So you'd need the 7/16 ORB on one end and -AN on the other if that's the fuel line you're using
jrsavoie
Recruit
We need a definitive parts list with links for installing a fuel pressure gauge.
Kind of like the Feed the Beast instructions.
I have a small pile of parts that I hope has everything I need. If I ever get to work on the truck again
Kind of like the Feed the Beast instructions.
I have a small pile of parts that I hope has everything I need. If I ever get to work on the truck again
SnowDrift
Ultra Conservative. ULTRA!
Probably like this
quadstartuning.com
Fuel Inlet Upgrade for DS Pumps
DS4 injection pump 3/8" fuel supply upgrade. This replaces the restrictive factory 1/4" inlet fitting that screws into the regulator assembly and allows you to run a new, larger, fuel supply line directly to the injection pump. Now featuring 100% aluminum construction! Our adapter fittings are...
quadstartuning.com
That's the one...a -an/jic fit's it, or get a barb to slid a hose on and clamp...