Search results

To make a long story short, I lost oil pressure. Changed the engine with the one out of my other truck to get by. Drove the truck for 300 miles after the engine change.(In between time had a major problem timing it). Then as luck would have it(sarcasm), yesterday i was driving it and white...

I cant seem to get my PCM to learn , or change my actual/desired timing at all. I have moved the pump to passenger side way over 1/4 inch and still no change. KO/KO procedure seems to do nothing after i move the pump. The scanner says i have +10.5 actual and +10.5 Desired timing. ECT is at...

:eek: About half way home from Texas to Wisconsin( pulling 5th wheel camper) , i noticed my oil pressure gauge slowly go down from 50psi( at 65mph) to 35psi (at 65). After noticing it i slowed down and pulled over to check the oil. as i coasted on to the exit ramp my rpms were at about 1000...

While in four wheel drive in low range, does the torque converter lock up? or do i have to get above 45/50 mph?(it wont go that fast)

I finally got my intercooler installed! It sat on the shelf long enough and i have alot of time on my hands so i thought it would be a good time to get it done. Here are a few pics.........................

Does anyone have a clue how to get the glowplugs to come on after the truck is plugged in all night? I am assuming that it senses warm coolant and thinks there is no need for glows. But its almost worse than if i dont plug it in at all. If i could bypass coolant senser until glow cycle is over...

I seem to have the same trouble as trainedpro. (see limp mode) At WOT going up steep hill, truck only i have 10 psi on autometer gauge in cab and i de-fuel and ses light comes on.:mad2: This is on the 96 truck in sig. I took a snapshot and this is what it said. Calc...

Is there an "HO" stamped or cast into the ho waterpumps. Or can you tell by the part #??

How many gph filter/ housing would be required for a 6.5 with a few mods and a reflash towing heavy? I cant find it searching. Brian

Back a couple years ago this intermittent problem started occuring. When i started the truck to go to work i would take off and sometimes it wouldn't shift out of 2nd gear. But if i would stop and put in park and shut off ignition and restart it, it would always shift normally after that. At...

Does anyone know if there is a do it yourself fix for my odometer? About a month ago my odometer quit working(trip meter too) but my speedometer still works. i tried doing some research but didn't come up with much info. Is there a gear that can be replaced that drives the odo? I was also...

Does anyone know if there is a do it yourself fix for my odometer? About a month ago my odometer quit working(trip meter too) but my speedometer still works. i tried doing some research but didn't come up with much info. Is there a gear that can be replaced that drives the odo? I was also...

I have a 96 2500 Long box extended cab(see sig) and was wondering how big of a fuel tank i have(gallons)? Thanks

I just found this 96 GMC 2500 4x4 (extended cab long box) at a local car lot. It has 80,000 miles, 3 in. exhaust(no muffler or cat) 3 inch body lift, runs good, drives good. Tires are about 80 to 85 %. interior is nice, the body has no rust(i think its from Texas) but a few small dents...

I too have been having hot starting issues. This has been going on now for at least 2 months. It starts perfect when cold, but when i shut it off after everything is up to operating temps, it wont restart. So one day after being stranded for over 1 1/2 hours, I ended up dumping some...