1997 K3500 4x4 Auto 6.5 Diesel.
Hey folks,
I have been told there is a Right Wheel hub bearing and a Left Wheel hub bearing assy.
I cannot tell the difference....Am I missing something here?? What is the difference???
Cheers,
Dave
Hello to All!! So here we go..1997 GMC K3500 4X4.
I decided it was time to replace the front end, WHAT A NIGHTMARE!!!! I mean really!! Ok give ya heads up, I replaced or HAD to Replace the Following...ready??..Upper and Lower Ball joints, Upper Control Arm Bushings, Inner and Outer Tie...
Hello all...In case you wonder what a typical Vacuum pump in your truck looks like. I took some pictures. I would hope this way...you can now understand what to look for, if, when it comes time for removal. This was in a 1997 GMC Diesel. With A/C.
First off, You do not need to remove the...
Hello to all!!
I recently found out where the Source of a "Rattle/Clank" noise was comming from on my 97 GMC. This noise was clearly evident when truck was idling.
When belt was removed and truck was running....NO NOISE.
Ok one step at a time. Checked the Vac...
Hello all!! I finally got around to installing a Glow Plug realy to extend "Glow" time. Posted some pictures. Hope it helps out.
Stock GM, Glow Plug Controller, Upper left around 11:00 Area.
Relay from Ford truck, Junk yard, Cash for clunker, Mint, 5.00 Dollars.
Momentary Push to "on"...
Hello to all..
I am new at this site. If you read my posts I have been quite active since I joined. I have already learned alot. And hopefully helped some as well.
Ok..so today I cleaned the underside of my truck. I like to keep it grease and Oil free.
So after I finished...
Hello to all!
I have a friend that has a Turbo from a 1993 3500 GMC 6.5. It is mechanical Waste Gate. I have a GM8 and he has A GM3. Okay...so the question at hand is.....Can I use the ENTIRE set up in my 1997 3500 GMC? The difference is, His entire unit is Mechanical Waste Gate and...