hi when i tried to start truck the starter made loud growling noises but would not turn the motor over pulled starter support bolt was missing one of the 2 bolts holding starter in place had broken off in hole cleared that installed new starter when i tried to start same thing happened have been...
hi all i just took my door off to install new pins and bushings but how do i compress the short spring enough to get it back in place thanks 4 any info.
hi all yesterday all was ok 2day started truck and dash brake light came on stayed on checked master cyl. level ok petal ok brakes firm no sign of leakes thanks in advance this is not the abs lite
hey i have a pmd mounted in bumper im in alberta it gets -40c here will the extreme cold affect it or should i cover or partly cover it 4 some heat thanks in advance
hey i need to replace a ujoint on my front shaft but the slip joint is siezed i got as far as getting the u joint loose but i cannot shorten the shaft if i heat the slip joint will it melt the old grease enough to bang it loose and let it drop or what??
thanks 4 any advice
hey dusty here i have a early 99 6.5 bout 200000k on it new injectors on imperial gallons i get 16 round town 23 to 25 on highway and bout 12 pulling 18000 pound fiver on non stop and go mileage
hey i just installed a new turbo guage tried it out when i walk on it it climbs quickly to btween 10 and 12 is this good average or poor thanks in advance 4 any info.