Got the following code on the burban. P1654 Service Throttle Soon Lamp Control Circuit. Please tell me it was only needing the bulb replaced on the instrument cluster! Thanks.
If you plan on keeping the burb for a while you could go the teds route and build it up to be a reliable engine with the mods learned on here. I always look at how much it is going to take to due versus can I sell it and get something else. My burb has alot of upgrades learned on this site but...
Great info Thanks! Doesen't look like I am gonna get the Bully Dog. DennisG01 have you used the Scangauge? Just looking for something with a little better measures versus the factory gauges and maybe fuel economy data if possible.
I agree I see alot of people putting in 4bts and different engines to get better MPG's. No matter how hard I try I can't get better than 12-17 mpg. I wonder how good MPG would be if you took the turbo off a 6.5 and put the hummer exhaust on it? Has anyone ever done that? As far as smoke mine...
Handcannon the place the pen is pointing to is where the gauges plug in from the front side of the cluster the only lighting for the cluster are the 6 bulbs. Don't know if that is the same on a 94 but on the 95 and up they are marked ILL on the circuit ribbon. Most back lighting for the cluster...
Handcannon its all good! I have heard about the LED lights and will be changing mine when I get the gauge cluster I got on order. Found a gauge cluster for $55.00 on ebay. LED's use less power and are alot brighter. Would love to find some red or blue LED light's.
BK Great info!!:thumbsup: They should save that in the tech library for sure. Thanks for posting that with pics!
Konstan I haven't ordered it yet was looking at options first.
Leroy I will give that a try.
BK went out and checked that connection and no signs of burnt or bad connection. How hard is it to replace the fuel gauge? Can I just replace the odometer easier when I get the used gauge cluster?
BK I cleaned all the grounds for the sender when I replaced the tank and sender. I put a new end connection on the ground as well and cleaned where it bolts to the crossmember. Any other grounds?
Leroy the needle went all exorcist on me and spun in circles and even got stuck on the oil...
My fuel gauge has gone crazy! Not the sending unit or the grounds just put a new tank and sender on it. Can the gauge itself be replaced? I found a complete cluster but miles are off how do you change out the odometer between the old and new one or can you do that?