Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Vehicle Monitoring Functions:
Real Time Fuel Economy - won't work. Serial 2 data in the 6.5 doesn't have the required parameters
Average Fuel Economy - won't work. The 6.5 obdII has no fuel quantity input for the calculation
Trip Fuel Economy - won't work, see two above comments
Load - will/should work, in % load
Coolant Temperature - will/should work
Fuel Pressure (gasoline vehicles) - won't work, duh!
Fuel Rail Pressure (diesel vehicles) - won't work, not a 6.5 monitored parameter
Manifold Absolute Pressure - may work, probably show boost pressure, or maybe baro in the S trucks
Engine RPM - will/should work
Speed - will/should work
Timing Position - may work, depends on the PID input. Only way to find out is try it. Meant for gassers
Air Intake Temperature - will/should work
Mass Air Flow (grams/sec) - may work, if you have one of the mass air equipped trucks.
Throttle Position - should/may work, in % throttle
Fuel Level - won't work, see average fuel economy commets
Battery Voltage - will work
Ambient Air Temperature - I'm gonna say won't work. Only input I've seen is for IAT. The 6.5 trucks don't seem to care about AAT
Transmission Temperature - depends on what PID they're monitoring, I'm gonna guess won't work
Pyrometer #1 & 2*(optional) - won't work, you need to add a probe
Boost* - see MAP comments
IPW (Injection Pulse Width)* - I'm gonna won't work, this is meant for common rail trucks, although I can adjust it on 6.5 trucks
Barometer* - see comments already made
Oil Temperature* - I'm gonna say won't work. Not monitored on 6.5 trucks
ICP (Injection Control Pressure* - I'm gonna say won't work. Not monitored on 6.5 trucks
*Diesel Specific Monitoring functions