Ok folks, I’ve had this P400 sitting in my garage for just under a year now so I guess it’s time to get going on the install. I picked this up from the GEP facility last December when I just happened to be in Ohio on business with my dually so I made some calls and was able to pick it up directly from them. Talk about a kid in a candy store! Motors stacked all over the place. I was actually inside and I tried to get them to show me around the facility but they said they could not for security reasons. Anyways , I’m putting this in my lifted 94 Suburban that has a Spearco intercooler and the IP has been converted to a DB2835-PE340 pump with a walbro lift pump. Since my truck has a lift kit I have been told by Matt @ peninsular that I can retain the cast aluminum oil pan, I guess we’ll find out. Since my existing motor still cranks and runs I am mocking up the brand new genuine Holset Super HX 40 not to be confused with a CKO Super 40 and down pipe, air box and intercooler pipes on the existing motor first before I pull it and install the P400. My heads are out being worked on presently. Here are just a few phone pics. I couldn't get all of them loaded here not sure whats up with that.