• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Modified 6.5 Build

Might not fit in the truck without some firewall mods. Up pipes are
2 3/8 stainless .
 
It's a 99 k3500. We are pulling the cab, so we might do a small body lift. Or slide the cab back,like one inch? It's also getting a custom flat bed ,which could be mounted slightly rearwards also.
 
Finally started this motor in the truck. It ran fine for a bit ,then dropped a cyl. When cracking the lines,barely any fuel at #2 cyl. The little fuel that came out was foamy. Can anyone guess what caused this ?
 
I built the pump ,it has a new head and rotor. Injector lines aren't loose. Injectors have china 311 nozzles .
 
It sees a prius and is foaming at the mouth with hunger?

Blocked passage in the pump is all I can think of at that point.
 
Back
Top