nycxjeremyy
Well-Known Member
Gentlemen, its time.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
How do you all get 6.2s to 300K miles
- Thread starter nycxjeremyy
- Start date
-
- Tags
- 6.2 maintenance
dbrannon79
I'm getting there!
Install the better one on the drivers side.
dbrannon79
I'm getting there!
BTW iirc LMC truck sells the replacement seat material. not a cover but the actual replacement fabric if you want to make them look new!
nycxjeremyy
Well-Known Member
Currently atm. Sprayed it with a hose. Brushed the hell out of it and used a shop vacuum to suck it dry (or try to, its a small 2HP ArmorAll one)
Its Currently sitting in the sun drying off. Its 70°F here atm
Its Currently sitting in the sun drying off. Its 70°F here atm
dbrannon79
I'm getting there!
Here is the kits for your factory seats
save your seats because they are un-obtainium. order you a catalog for your rig from the site, you'll find all kinds of parts you'll want!
save your seats because they are un-obtainium. order you a catalog for your rig from the site, you'll find all kinds of parts you'll want!
nycxjeremyy
Well-Known Member
Oh boy
nycxjeremyy
Well-Known Member
Update:
Was able to remove the tracks from the K5 brackets, it actually does somewhat line up, looks like ill have to drill some holes though unfortunately.
My concern now is that ill have it too much on one side than another and it'll come out uneven/unaligned.
(I was actually able to bolt one of the holes to an original holes, to somewhat use as a guide)
What do you all think?
Was able to remove the tracks from the K5 brackets, it actually does somewhat line up, looks like ill have to drill some holes though unfortunately.
My concern now is that ill have it too much on one side than another and it'll come out uneven/unaligned.
(I was actually able to bolt one of the holes to an original holes, to somewhat use as a guide)
What do you all think?