• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. C

    Digital gauges, datalogging, and more for OBD1 diesels

    They are pretty versatile little devices. I had 2 of the communicating over CANBUS, one was the main processor and the second was just for the display. Just need to integrate the sensors and figure out data logging in Excel.
  2. C

    Digital gauges, datalogging, and more for OBD1 diesels

    Yep, so far the plan is EGT, boost pressure, drive pressure, and TPS. I may add more sensors and a bigger display at a later time.
  3. C

    Digital gauges, datalogging, and more for OBD1 diesels

    I'm going to build an Arduino based monitor/data logger instead of springing for Banks or Edge hardware. I already have a lot of the pieces from when I was attempting to build a VGT controller, so it should just take some repurposing and programming. It will be completely standalone though, no...
  4. C

    What did you do with your GMT400 today...or yesterday....

    Moving at a snail's pace on my A2W install, but progress is progress. Had a few minutes to fab a lower bracket for the heat exchanger and got it bolted in. Next will be the upper brackets and finding somewhere for the pump.
  5. C

    What did you do with your GMT400 today...or yesterday....

    O Ed fgfcbbbn,; I guess I could put in a little more effort to make room for the condenser so I could get AC back, but that will be for down the road.
  6. C

    What did you do with your GMT400 today...or yesterday....

    Both are existing stock coolers so they will fit just fine. I did LED bulbs before as well, I love them! These new housings have glare shields so it won't be as bad as before.
  7. C

    What did you do with your GMT400 today...or yesterday....

    Started fitting the heat exchanger. Going to use some scrap aluminum angle I have laying around and rivet nuts to put it in the core support between the oil and trans coolers and radiator. Should I fill the holes in the core support that the old CAC used to pass through?
  8. C

    What did you do with your GMT400 today...or yesterday....

    You could do that, but these engines have enough cooling problems as it is. I didn't want to mess with that coolant flow and possibly compromise it. Plus having a standalone coolant loop allows for lower IAT because the engine isn't heating the coolant too.
  9. C

    What did you do with your GMT400 today...or yesterday....

    Yep, exactly. I haven't done the water side yet. Working on removing the old stuff to make room for the new.
  10. C

    What did you do with your GMT400 today...or yesterday....

    Ah gotcha. There will be a dedicated coolant loop just for the CAC with a 24"x12" radiator in the core support and an electric pump to circulate the coolant through the loop.
  11. C

    What did you do with your GMT400 today...or yesterday....

    Same as any other charge air cooler, a turbo/supercharger pushing the air through.
  12. C

    What did you do with your GMT400 today...or yesterday....

    I'm redoing the intercooler, so it is already all being torn apart to get the Cummins CAC out of the core support to make room for the A2W heat exchanger. I had to hack up the current headlight assemblies to clear the A2A CAC so it warranted replacing them.
  13. C

    What did you do with your GMT400 today...or yesterday....

    All good, verified right and left.
  14. C

    What did you do with your GMT400 today...or yesterday....

    I'm waiting for UPS to drop off my new headlights right now. Hopefully I don't have the same problem!
  15. C

    What did you do with your GMT400 today...or yesterday....

    I think it's a cool piece, but out of my price range.
  16. C

    What did you do with your GMT400 today...or yesterday....

    Loaded up the parts cannon again... The Cummins intercooler is cracked in one of the lower corners and leaking boost pressure, so I'm going to replace it with an air to water setup instead. I can put normal headlight and marker light assemblies back in the core support and be less airflow...
  17. C

    Torque 6.5L Specific PIDs

    Sorry, should have mentioned that. It's for a 1997 OBDII truck, but the tune uses PIDs from a 2000 model year ECM.
  18. C

    Torque 6.5L Specific PIDs

    Does anyone happen to have a line on any additional PID specifications to use with Torque? I have the GM enhanced list included with the app and Quadstar's list, but neither include a functioning TPS PID. I want to do some logging to clean up my tune for the S364 and need to log TPS so I can...
  19. C

    What did you do with your GMT400 today...or yesterday....

    Swapped the injectors out for a set of new Quadstar-built marine squirter set to 155 bar pop pressure to work better with the Beast. Next is swapping the 0.88 T4 turbine for the S364 to a 0.80 T3 wastegated turbine. Hopefully that helps bring in the boost sooner to keep EGT down.
  20. C

    What did you do with your GMT400 today...or yesterday....

    I think the only option I have is to put it where the drain spigot is.
Back
Top