Search results

early 1999 is it hard to change the ignition switch drop the steering then can i get at it ?? thanks 4 nay info.

well guys problem is solved we checked the glow plugs 3 out of 4 on drivers side failed mechanic said rule of thumb is 3 failures and u change all 8 did so and it fired right up lucky 4 me i have a chevy. mechanic to do my work thanks again

the glow plugs have about the same cycle i have 5/40 syn oil in it and when its in the garage not heated it always starts as 4 the gas motor will it last 400000 mmmmmmmmmmm don't think so. mine only has 200000k on it thanks for the heat gun idea only prob. my daughter borrowed it so i guess...

hey my truck was outside and it was plugged in but i didn't no it wasn't getting power to the blockheater bout 14 hrs. when i got back needles to say it didn't start. today i went back got power to the motor charged the batteries hooked another truck to boost it started once 4 bout 5sec. put...

thanks i just bought a extention for the pmd and relocated it inside the front bumper now runs very cool i put in two new batteries with two pos posts and 2 neg posts and now have 4 different grounds but i will check the ext. cable 4 any pinches thanks

hi thanks guys i forgot to mention when it stalls i just put it in netural turn the key and it fires right up and purrs.till the next time. im fairly new at this and don't understand what sort of mech. prob should i be looking 4 and how do i test the supply pump yes i have a code reader and no...

hey don't no if im in the right spot or not truck started stalling mostly when i apply brake to turn sometimes when i let of the footfeed when have to slow down truck always starts right now wheni statr it and purrs. have had truck 4 , 3 half years since replaced and relocated pmd to front...

hey guys have problem started couple days ago truck quit while driving shut off key tried restart started then quit in bout 2 seconds did this couple times then i noticed when i turned key on the engine light and the wait to start lite were very dim then faded out turned key off and on few times...

hey can a guy take this valve off and clean it with varisol or something else or do i have to buy a new one thanks for any info.

hey anyone tell me about the insulation under the hood is it there to help keep the noise down or if i remove it will it help keep the temp. down under the hood let the pmd run cooler thanks 4 any info.

i don't know if im in the right place or not but need some advice early 1999 4x4 2500hd 2100000km. my exhaust was altered when i bought the truck it has stock down pipe on it then is 4in. all the way to the end with a muffler but no cat does it make any or much difference without the cat. and...

slip thanks guy i haven't had time to take it off yet hopefully next week but great site i feel im much more advanced on this already will let u no how it goes thanks again

hi my front shaft is seized up at the slip joint what is the best way to get it loose thanks

loc. leduc alberta out skirts of edmonton

hey i recently started using rotella 5/40 syn. how long can run it btween changes.i was just now told to remove the 5/40 and go back to and stay with 15/40 as that is all that is recommeded for the 6.5 as it has a turbo this seems awful strange to me anyone tell me the change miles and the...

sorry i tried again and it works thanks anyway

hi ithink something is wrong with mt account it seems that i can log in then thats as war as i can go i can read but not do anything else can u tell me what is wrong thanks dusty

wow i guess there are more reflashes out there than i knew bout thanks guys

chip mmmmmm i see u have already delt with westers how do u like the chip what did it cost??

hey canadians did u know we can get the same comp. reflash as the big guys sel they are reflashed right here in alberta at www.westers garage.com in tilley alberta check it out they sell to a lot of the big suppliers in the u.s.a. only a lot cheaper