My Fisher V Plow needs the "A" frame to be parallel to the ground. If it is not, when in a "V" or a "Scoop" mode the cutting edge will not be completely in contact with the ground. It all has to do with angles, I hope this helps...
I am interested in aftermarket bumpers, front and rear. I like the look of the Fab Fours without the grill guards. My problem is that I have a Fisher V Plow and I don't know if the front bumper will work with the plow. I e-mailed Fab Fours and they were unsure if it will work, but they said...
I am looking to get some new tires to replace the stockers. I want to get some BFG All terrains. For now I am going to get 265's put on the stock wheels for snow plowing. My question is which load range should I get. Load range "D" is rated for 3042lbs, which is rated higher than the stock...
I installed my about a year and a half ago. I did the LUX version and also installed the 6 disk CD changer. I love it and it works great!!! If I was to do it again I might go aftermarket and buy a GPS I could move from vehicle to vehicle. That is the only down fall, it is stuck in the dash.