Recent content by big block 88

That grille thats on there isn't the best IMO, I belive he went to a stock style grille and the lines actually follow very well

From another site only issue he had, was there are no brackets that run out to the side of the bumper which lets it sag a bit he fabbed his own brackets to make it work.

Yes it can be done, It will take some fabrication on the bumper brakets but it will work and it looks much nicer.

Why not get the exhaust and windshield thrown on your ole tow rig while your in the states, would save you alot of money

Very nice wire break down thanks guys, I have a big trip planned this weekend to a yard in MO I will be filling a bed with stuff for my old 91 z71

Roger that, the junk yard in Liberty MO is having an all you can carry for 65 bucks so I will be loading up, we will find out if a 250 pound fella can carry a short bed full of parts on his back. LOL

A 68mm Cheetah can make 800 plus with some spray, but your egt's will be an issue with a big single on big tunes, and turbo lag will be killer compared to twin setup. The stock IHI is a bit restrictive and limited to what it can do around 500hp you can twin it and get 600-700 I would ditch the...

I would like to see the write up also, I know 88GMCtruck got one for his 99 but I haven't ssen the write up yet.

EFI, Trans, twins, dual fuelers, lift pump, bigger nozzles, head studs, pistons, rods, and deep pockets to keep it together if you want to run it hard. This list is to make the power as reliably as possible. Can you make that power with out rods and pistons?? Absolutely but don't expect...

Yeah I saw your thread, and I am impressed, seeing as the 91 is being torn apart I might aswell throw a few neat tricks in. Mine being an extended cab I am wondering if the wheel being close is really an issue?? I sit with the seat all the way back anyway for leg room but my arms are...

What does Steve Cole think of this site using his TTS name??? Just a heads up Steve may not aprove of this...

After looking at the pics of the newer columns it looks to me like the columns are very similar under all the plastic of the newer columns. I am making a junk yard to MO here this weekend and if this will work I will pick up a wheel.

What is the draw back to it being a deeper wheel?? If they will fit the column it would be decently easy to make the controls work I would think?

Thanks Mike I'll give it a try in the mornin I have faught old rusty parts enough for one day.

Hey everyone i am trying to replace my oil cooler lines on my 91 Z71 350 TBI and it has those damn GM push lock connectors like the fuel pump connections, but larger. The quarters are very tight down there as they run right along the oil pan and the transmission brace (which I have removed for...