stalling

[Jerryjerry05]

The PMD is on a heat sink.
No the no start would be hot or cold. More when hot.
It's running now.

 

[Will L.]

Carry the injector line wrench with you to test for fuel output incase it happens again. Also a remote starter button so you can crank and check incase your by yourself.

 

[NVW]

I feel for you. Bobbie Martin wrote this book...

http://www.thetruckstop.us/forum/threads/the-db2-conversion-guide.30127/#post-354769

 

[Jerryjerry05]

http://www.mamut.net/royh/newsdet9.htm
This is from a guy Roy Halvorson in Finland and it's about the optical sensor removal and replacement.
Open and read. Good pics too.

 

[jrsavoie]

http://www.mamut.net/royh/newsdet9.htm
This is from a guy Roy Halvorson in Finland and it's about the optical sensor removal and replacement.
Open and read. Good pics too.

I tried that link and it no longer worked

 

[Jerryjerry05]

This thread is over a year old.
I guess not all the links stay open forever?

After all the trouble and time(about 6mo later), I finally figured out what the real problem was.
The contacts in the injector harness and the contacts that go to the injector pump were not making contact.
I removed the radio filter and cleaned the contacts.
Been working fine for 6mo+