Ray Dawson
New Member
Just did the OHC install on my son's '95 Cheyenne yesterday. I found an OHC console from a local junkyard only to find that is the longer one and would not fit in his truck. Got lucky and found a shorter one at another junkyard. Once we cleaned and painted the headliner from another donor truck, I wired the map lights to the dome light wiring, modified the OHC to sit flush with the headliner, and installed it using 1 1/2" sheet metal screws in the back and the factory one up front.
I think it turned out pretty good and it was good to be out working with my son alongside me getting his hands dirty on his truck.
I think it turned out pretty good and it was good to be out working with my son alongside me getting his hands dirty on his truck.