NV4500 and BW Tcase rebuild begins

[tanman_2006]

AHH bench pressing a NV 4500!!!!!!!!!!!! Been there done that it sux. Be carefull they like to roll!!!!!!!!!!

Try a clark 5speed out of a 72 wheat truck, makes the NV seem light.

Good thing I benched 405 cold turkey last I checked! It might be heavy otherwise lol. (sucks no matter what)

Sent from: Source Unknown

 

[GM Guy]

thanks for the input!

I am not in as good of shape, so I think we will try the tranny jack.

 

[GM Guy]

got it out with the tranny jack.

I officially hate the early top cover, dad had to bend the corner of the floor up, and we undid some cab mounts and jacked the rear of the cab up so it would come out.

the previous owners had it out before, as the area dad had to pry up is allready mangled.

anyone have good ideas to straighten that edge without stretching the metal?

so now, we need to figure out how to get the tranny off the jack without hurting anything, as it wont clear anything while on it. dumping it off was my thought, but we would probably break something.

 

[625fireman]

Do you have room to jack the truck up high enough to get it out??? If not you'll probably have to dump it off.