DieselSlug
Well-Known Member
Been hearing a bit of a clunk on the Yukon over the last couple days. Finally did some inspections and I have a loose ball-joint on the upper passenger side. Racking my brain, I've been there before, actually on March 30th, 2023 (post #329). Unfortunately I was in a bind, the night before leaving for our 1.2k-mile trip with store shelf options....... Napa quality for you.
I've got a TTX joint on the way from RA, paid extra to ship it quicker as we are going out of town this weekend. It should arrive tomorrow. I need to check and grease the others too. I was looking hard at the Napa Fleet (been discussed here too back in mid-late 2023), but it was nearly 3x the price (2x the price even with 2-day shipping) opposed to the puke green TTX from RA. I'll put all the puke green parts on my rig for that kind of price difference.
So far I am running a TTX pitman arm, and both front hub assemblies with no regrets to date.
I've got a TTX joint on the way from RA, paid extra to ship it quicker as we are going out of town this weekend. It should arrive tomorrow. I need to check and grease the others too. I was looking hard at the Napa Fleet (been discussed here too back in mid-late 2023), but it was nearly 3x the price (2x the price even with 2-day shipping) opposed to the puke green TTX from RA. I'll put all the puke green parts on my rig for that kind of price difference.
So far I am running a TTX pitman arm, and both front hub assemblies with no regrets to date.