-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Extra fuel filter placement
- Thread starter Bigburban
- Start date
NVW
Well-Known Member
This is just a base line but if it is greater than 10 micron put it pre LP, if less than 10 micron go post LP.
Turbine Doc
Just Another Diesel Guy
X2 ideal would be a (3) filter setup; with 20 or 30 mic prefilter, to a 10 mic after lift, and then a 5 (like oem) or a 2 prior to the IP, since cost & real estate for mounting can be a factor 10 micron as a pre-lift is a good compromise.
Make sure your 10 mic as a prefilter is low flow restriction, on my rig I have the Racor 60 gph element in 10 micron to keep flow restriction to a minimum.
Make sure your 10 mic as a prefilter is low flow restriction, on my rig I have the Racor 60 gph element in 10 micron to keep flow restriction to a minimum.