VW_Lupo_TD
Active Member
anyone ?
i assume the same as 4LE80 but i cannot find that either....
thanks
i assume the same as 4LE80 but i cannot find that either....
thanks
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
4LE60 torque sequence for pan to transmission housing bolts ?
- Thread starter VW_Lupo_TD
- Start date
- Staff
- #2
I always just go around in a circle pattern and pull them up slowly and evenly and torque to 11 foot pounds I believe it is.
VW_Lupo_TD
Active Member
circle pattern ? if i remember correctly that is not the way to go.
i was assuming you should go from the inside out in a criss cross pattern.
but if it worked for you, i guess your guess is better than mine ;-)
i was assuming you should go from the inside out in a criss cross pattern.
but if it worked for you, i guess your guess is better than mine ;-)
JiFaire
Land Mine Finder
Most of the torque specs are i the 6.5 tech. library, thanks to Matt (Alberta Redneck)... here is the trans. pan R/R guide and specs from ARRC - Courtesy of BigArt). For other stuff, look in the 6.2/6.5 Technical Reference Library under 'Manuals'
Hope this helps, Nick!
Jim
Hope this helps, Nick!
Jim