• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

Search results

  1. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hello Leroy and Chevypoor, My pressure gauge works well. The display goes to 19 PSI. My pressure with my defective boost pressure sensor(Code 62) was 4 PSI. With my new boost pressure sensor, he is no more than 2 PSI...! The spring that I have attached to the Wastegate is tight...
  2. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hello GM Guy...Hello Chevypoor, I have installed a spring to keep the Wastegate constantly closed. I have 2 codes-32 and 33...my vacuum pump creates no vacuum. I have no original air filter ... i have one from a Accessories Shop , pyramid shaped as some here also to drive him. I use my Tahoe...
  3. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hi Leroy,. Here you can see my connection from the boost gauge. Greetings... Gunar
  4. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hello to all, I could not eliminate even until my Problem... I have still no Boostpressure. I have changed my Boost Pressure Sensor, because I had a Code, but the Problem is still not solved... I've do also a Pressure Test of my Intake System. Now it's time for a new Turbo?I have 380000 km...
  5. G

    CDR Valve replacement

    Hello about 3 years ago I put the marine injectors by SS in my Tahoe The first ride with these, I thought, man the Chevy runs just like the Devil... but 40 HP more ? Not realy... I should have bring my old Bosch injectors and the new to a Bosch service to see if there is really are a...
  6. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hi ak, I'm again have controlled all ... nowhere is soot or press exhaust gases to the outside. The intake manifold is tight... My old crossover had a long Cut...boost was ok... After my head gasket change last week I have found now Blowbye gases from the dipstick and oil at the...
  7. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hi Friends, The Work is done - I have build in the new Parts...sounds not bad... Problem is now I have only a maximum Boostpressure of 2.9 PSI... is that on the larger Diameters? I have no Muffler or Cat... do I need now more Backpressure so I again have enough Boost ? Greetings Gunar
  8. G

    6.5 Engine stutters

    My Engine runs again -no Code-the Cable was uptight under the Intake Manifold... Greetings Gunar
  9. G

    AC Bypass Pulley Kit

    Dorman 34152 fits perfectly-also with the original Belt! Greetings Gunar
  10. G

    6.5 Engine stutters

    Добрый день Павел;) I know where the TBS is located - I must look again or build down the Intake Manifold... Do you know whether this the Diesel/Air Mixture also influenced? Спасибa Gunar
  11. G

    6.5 Engine stutters

    Hello Friends, I got replaced my Headgaskets -Engine runs good- but when I want to accelerate then had the Engine misfires(he stutters). I have a code 62-needs the Engine the Turbo Boost Sensor also for the Diesel/Air Mixture?(My problem is also that I can't find the Plug/Cable that going to...
  12. G

    IP Part

    Hello Friends, A lot of you drill this Part for the -FtB-Modification- which is screwed into the IP. Why not just like on the Picture cut or built in another part of suitable fit? When bevor installed an extra fine Filter, need this small filter? And for what is the second O-ring? Leads...
  13. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hello Leroy, Thank you for your Answer! I have ordered one from a German Dealer. He had made me a good Price and I can bring back the VAT me with us. Gunar
  14. G

    Flowmaster 17220 Turbo Downpipe and Crossover Kit

    Hello Friends, I searched already here in the Forum and write to a member... Can anyone tell me if this Kit at a 1995 6.5 Tahoe 2 door 4 wd fits or whether it fits with changes or not at all ?Or is there a kit in size what fits by other manufacturers? Flowmaster 17220 Turbo Downpipe and...
  15. G

    AC Bypass Pulley Kit

    I thank you for your help! I've ordered me a bracket and will see if it fits... I let you know. Gunar
  16. G

    AC Bypass Pulley Kit

    Hi Marty, I also found this and speak with Summit if this fits-the Answer where no It is also there for the 5.7 litre engines, nowhere anything of 6.5 Gunar
  17. G

    AC Bypass Pulley Kit

    Hello Friends, I'm looking for an AC Bypass Pulley Kit. I have searched for different Partsdealers, but found nothing. Is there anyway to buy one or must I build one myself ? Thank you... Gunar
  18. G

    Mercury Sport Jet

    Hello Friends, I am interested in a 250 HP Mercury Sportjet. Does somebody of you drive this in his Boat / Jetboat and can write something to me about this Unit?! Give it often Problems with this Engine and Jetpump or does everything run easily? Till present I only know the 90 HP Mercury...
  19. G

    U Bolts

    Hello friends, Thank you for your opinions... Greetings Gunar
  20. G

    U Bolts

    Hello friends,. I would like to renew my rear U bolts... The original have 16 mm(0.62´´) Bolts...i have here which with 13 mm(0.51´´) Bolts...Is it sufficient? They can withstand the torque of the axle or is it better to take original..? My Tahoe had no Suspension with Blocks or other...
Back
Top