Search results

Yes i have a 3 inch aftermarket down pipe on my truck already.

Will a dmax exhaust fit from the end of the downpipe back they look almost completely the same.

Ok i found their site and a spot were i can order it too thanks for all the help.

Just what the title says where can i buy the Peninsular Intake Adapter for the 6.5. Thanks :)

I know that the pulley isnt the balancer, the pulley is bolted to the balancer, if i grab onto the pulley it moves back and forth, im pretty sure its moveing the rubber inside of the balancer thats why it has movement.

Is that hard to understand, the pulley is bolted to the balancer and theirs rubber between the two. Its the rubber in the balancer

Yes thats what im talking about

I had my truck up on the lift today doing my oil change. So i figured i would check the balancer to see if it was tight. I can grab the pulley and move it back and forth, its somewhat hard to do but it still moves and i would say about 1/4 to 1/2 an inch back and forth. Would this be too much...

yes i know this is illegal, but has anyone done this. I figured i need a new hood anyways why not see what it looks and sounds like , i figure i can just turn my 90 degree down pipe to put up and then cut a hole and get a hood stack kit like this

It does not really bother me but if their was a way to get it clean I would and these 6.5 s are indirect injection I'm not really worried about it being black kow

Ok today i replaced one of my ebrake cables and the rest were in good shape and moved freely, i replaced the brake shoes also and my ebrake does not work. I have adjusted the brakes as far as they will go, the ebrake pedal goes does smooth but i guess its not pushing the shoes out far enough or...

Ok thanks i got it now

Im looking for a digram for the hardware for a 1994 chevy c3500 drum brakes, anyhelp thanks i cant find any good digrams

Ok i dont think its a mendral pipe bender here is a pic of it

Yes im pretty sure, we dont use it

Yeah no muffler, its straight 3inch pipe to the stack, I have a mendral pipe bender at my work, so when i get a chance im going to order some 3 inch pipe and make a nice exhaust to connect the stack better

http://youtu.be/el2WU9yz2-0

I was wanting to replace the drums with disc because, the parking brake always seems to stick, and when its wet outside the brakes grab in the rear, but i think i might try to replace the shoes first, when i replaced the hardware i noticed that the shoes are starting to seperate from the rivits...

I found some conversion kits on ebay does has anyone used these before