Recent content by vstech

Just an FYI... I have a duramax parked for engine troubles if you still need a pattern... Belmont, nc... 15 minutes from most of charlotte.

Anybody making these cables any more?

I've looked for the leak, but cant find anything. Any thoughts? I'm about to take it to dealer...

I’m not far in Gastonia and Shelby Nc most days... I’ve met Sctrailrider at his AWESOME shop...

FYI, I live near the Wix filter plant... they have changed owners 4 times in the 20 years I’ve been here... was Dana, then affina, now it’s some unpronounceable company... could be a sign of the times...

Not 5/8 npt ... either 3/8”npt or 1/2”npt... there is no 5/8npt...

Ok, that is weird... The fittings that have the oring on them go to a stock cooler, and the guy who packed the kit musta been low on sleep... Call Leroy and have him look at this video and I bet he goes and slaps the guy that packed your kit... The elbows that were in your kit will fit into...

now is a good time to get extended bolts, and raise up the FFM above the intake runners, and replace all three fuel lines feeding the FFM... kill two birds with one stone. replace the leaking line, and make it MUCH simpler in the future to both find a leak, and fix it.

I sincerely doubt leroy sent you 3/4" fittings, as they wouldn't fit in any block. should be 3/8" NPT (about 3/4" diameter at the threads) for old motor, and 1/2" NPT (about 1" diameter at the threads)

post up pics of all the fittings you have in the kit. I think the swivel parts are for the cooler end... not the block.

that wear is why I think ALL motors should have rollers... the roller tip rides on the face of the valve stem instead of sliding across it. I'm planning to put the HS rockers on all my motors. of course, I put 5K a month on my trucks...

damn! how'd you find my baby pics?

both of my trucks carry a pair of 20' 2" ratchet straps, and a 50' grade 70(whatever that means) 3/8" chain in the winter... my work truck doesn't see much offroad... stupid open diff!!! I've pulled plenty of ID10T's out of predicaments... I've got a 12K electric winch I plan on mounting on a...

Wow... Assuming this gets assembled... I've been following the thread a WHILE... How long to INSTALL the motor?