• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

New profile posts

Hello Young man, I have a 99 GMC 3/4 ton with 5.7 and 4L80. Trans needs work. I have a core from a 2006 Chevy. I understand the rebuild kit should be the same between the years. I would like to install new solenoids. Are the solenoids different between years? I found a master solenoid kit for 1991 - 2003. I am I on the right track. Thank you for your time.
1993 c1500 removed the dash cluster and reinstalled it and now the speedometer isn’t working any ideas
2005 chevy siverado 3500 4x4 8.1L w/ allison 1000 5 speed having transmission problems code u1024
O
osburnpj
Wires on the harness looks good, I replaced the inside wires to the transmission. Only thing I haven't tried was getting a new tcm cuz there so costly and not real sure that would even fix it.
Owen 1996 6.5 turbel 3500 dually just rebuilt. engine having trouble with cold start runs great after getting it started.
Any advice on what to look at, timing is per the OEM spec. +/- 2 degrees. Dist. is a new EFI Connection vortec unit. Crank sensor is a EFI connection provided sensor and billet cam cover.
newbie - truck is 98 K2500 Chevy. In process of installing a SBC 427 Dart SHP block stroker. Has AFR aluminum heads and Cust. Grind COMPCAMS Hydraulic roller. OEM EFI (with a 48lb/h rated spider) and ignition with a 0411 PCM upgrade with a custom BBP tune installed. Getting a Crank/Cam correlation OBDII code.
598gold
598gold
Finally got this worked out - crnk sensor not spaced adequately needs minimum of .030" airgap to reluctor, dah. Now working on PCM tune lots of issues.
95 Chevy 6.5L T-Dsl-Installed new BLOCK heater/replaced 1/2 batteries & it would not crank (instrumentation lights work). OBD1 system-what is wrong electrically? 2nd battery still good. I am open to any suggestions as to the problem & a solution or where 2 get a better scanner. Thanks!!!
Hi, I'm currently trying to use your db2 conversion guide and I have some questions about wiring and a few accessories. If you have time to discuss it I would be grateful.
Hello

Rumor has it your may have some Banks 6.2l turbo manifolds available?
I'd sure be interested in buying one if you do
If you’re not a mechanic, you’d better learn the use of YouTube fast or you’ll have nothing but a yard ornament or an expensive bill to change one part.
The TOPDON LITE scanner indicated that the the Glow plugs in cylinders #1,3, 5 were bad. I removed
them, tested with an ohm meter and they checked ok. Then I tested them with 12 volts DC and
they would get red hot in only about two seconds. With a TOPDON PRO hope for something new
will come up. So far, the 6.6 L Duramax LLY
makes no effort to start with the starter spinning great.
Me & my husband rebuild at 1963 GMC P20 step van ice cream truck. We put the truck in shop to get the front end done. On the way home the tire fall off. So we are looking for a GMC ck3500 front axle complete.If you know anyone who might have this could you please let me know thank you. Here are some pictures of the truck
I wanna swap out my 97 k1500 4l60e to a 97 4l80e trans what would i all need besides the torque converter for the 4l80e ? And do i need the plug harness end for the 4l80e as i read some where one time i can make the 4l60e plug work by moving some wires around ? And i know i need to move the crossmember back a ways
With my "No Start" problem I tried using a scanner which posted a code of PO81-3F. It read "Wait to start" ign failed. Any suggestions will be appreciated.
  • Like
Reactions: jrsavoie
C
Craiglabor92
Yesterday I got the same reading with a different scanner. PO72, 73, and 75, Descriptions: "Glow
plug control circuit" So, maybe they are talking about the glow plug module. I don't even know where that is, and if I
find it I don't know how to check it. I guess, as a last resort, we will have to have it towed to the GMC dealer and see if they
can determine why it won't start. :(
C
Craiglabor92
I took off the dog box and found it. Now I have to get it out and try a new one. I'll post the results later.
C
Craiglabor92
Installed a new one but still get the same fault..
The lift pump is not pumping fuel to the fuel filter now.
I have it removed and checking,.
Dec 2023
I have just swapped out an 01 4L80-E transmission with an 03 4L80-E transmission I used all of my sensors and hardware on the used one and it shifts a little hard in second and harder in 3rd. It started shaking the whole van yesterday when I went up steep hill. I pulled over put in park then put back in drive and it's been ok. Do I need new sensors?? I'm dumb when it comes to transmissions!
I am 54, and just bought my first diesel truck. 2007 Chevrolet Silverado 2500HD 4X4 New body style 6.6l LMM. I am having the DPF removed, and an external fuel pump added. I'm not looking to go crazy with horsepower, I just would like recommendations on upgrading. For example, transmission cooler, etc. I plan on using it for mostly pulling campers, and trailers.My truck.jpg
This 2003 GMC (C4500) has a "LINK Mfg. UltraRide system" installed when the vehicle was new & was part of a Detergent TIDE NASCAR fleet. (Thus the color). The tank was installed on its side, thus moisture could not be drained which has led to tank & pump failure. Best options for solution???
1995 Silverado 3500 dually bought it non running…my first diesel engine but I’m learning with the help of the forum and YouTube …just got a pop tester and soaking my injectors (6.5 L Detroit diesel) getting them ready to test but may be in need of shims for Bosch 0430211097 turbo diesel injector…71 years old hope I’m not too old to learn but I am a grumpy old man…thanks panran
Back
Top