• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

What proportioning valve to use

Twisted Steel Performance

Anything worth doing is worth overdoing.
Messages
3,983
Reaction score
7,588
Location
Pauline, SC
I will be starting a rear disc conversion next week on the 93 dually, I have purchased a couple proportioning valves and they turn out to be wrong, seems the early trucks have a different one than later models.. anyone know the correct valve that has the correct line placements ?
 
I know nothing about these conversions but, I believe a valve from an early four wheel disk brake system would probably be what is needed.
Probably need a master cylinder from the same too.
 
Back
Top