- Staff
- #1
I installed a Walbro FRB-10-2 and Pre-Lift Pump Filter with mount today.
Before I started working on the install I took a video of the truck running. It has been stated that this LP will change how your truck sounds when it is running.
http://youtu.be/OUiMkvL8o3M
http://youtu.be/Zbx0r9keYsg
I also tested to see what my LP pressure was at the end of the fuel drain.
Running at idle: As you can see it drops to 1psi at idle
Pressure with LP on motor not running: with the motor not running it sits at 3.5psi
I started out by removing the parking brake cable bracket.
Then I removed the old factory LP and plastic holder. Here is what it looks like installed.
Removed LP
More to follow! :thumbsup:
Before I started working on the install I took a video of the truck running. It has been stated that this LP will change how your truck sounds when it is running.
http://youtu.be/OUiMkvL8o3M
http://youtu.be/Zbx0r9keYsg
I also tested to see what my LP pressure was at the end of the fuel drain.
Running at idle: As you can see it drops to 1psi at idle
Pressure with LP on motor not running: with the motor not running it sits at 3.5psi
I started out by removing the parking brake cable bracket.
Then I removed the old factory LP and plastic holder. Here is what it looks like installed.
Removed LP
More to follow! :thumbsup: