Big T
Well-Known Member
Which one do I get: 1 1/8 or 2.0 degrees?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
ah ok. these look like the OE ones on my truck. I had to buy some aftermatket offset bushing to install on the drivers side to get mine back in alignment. not sure what was up with the alignment but they had to max out the adjustment just to get it close with standard upper bushings. I installed the offset bushings and took it back and they were able to adjust it.
do you have yours off? In the pictures posted the holes are in different positions, compare them to yours.
Stock bolts are 2 degrees.