marvgarr
Active Member
I was wondering if anyone would help me with tuning my own chip? I don't want this thread off topic like the last one. I don't want to copy any ones just want to clear out some and change some.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
Tuning
- Thread starter marvgarr
- Start date
- Staff
- #2
It's been awhile since I did much with this. It's been over a year now since I helped slim out with getting started, and I know he has learned alot more about what works and what doesn't than I could since he has a 6.5L to tune in real time. The biggest problem I seen with what was going on in the other thread was the definition files weren't very complete, nor accurate. Getting a GOOD definition file is the key to get tuning.
marvgarr
Active Member
Any idea on how to optain a good definition file?
JayTheCPA
Well-Known Member
Maybe PM Slim or Leroy . . .?
Or try a local independent (or sympathetic dealer) that is comfortable with handing over the last OE tune and go from there?
Or try a local independent (or sympathetic dealer) that is comfortable with handing over the last OE tune and go from there?
marvgarr
Active Member
Slim hasnt been here since april. I will check with leroy.
Quadstar Tuning LLC
Quadstar Tuning LLC
marvgarr did you have any luck? I have some of the incomplete files kicking around
marvgarr
Active Member
no luck on the files. if you have some that would be great. what is incomplete about them?
Quadstar Tuning LLC
Quadstar Tuning LLC
That's a good question. I'd have to compare it to a complete one to give you an answer.
I can't figure out how to PM you on here. Are you on DP also?
I can't figure out how to PM you on here. Are you on DP also?
ak diesel driver
6.5 driver
at the top of the page hover over inbox and a drop down box will appear that gives you the option to start a new conversation (what pm's are called on the new software)
JiFaire
Land Mine Finder
You might also try to contact BJ (Great White) ... he was tuning 6.5L OBD2, and knew lots about that. I haven't spoken with him or with Dennis in a long time.
Last edited: