Matt Bachand
Depends on the 6.5
If -1.94 is the highest (lowest?) you can achieve without coding, could that be reprogrammed in the PCM itself to not code? Thus allowing more advancement?
Just curious.
Just curious.
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
TDCO Beyond -1.94
- Thread starter Matt Bachand
- Start date
Brooklyn Tow
9 11 Never Forget
The rattle would be unbearable...
ak diesel driver
6.5 driver
Probably better would be to adjust the curve so it could peak higher at speed. Seems like Buddy played around with this some.
Turbine Doc
Just Another Diesel Guy
Driveability suffers if you get it too far out of whack, if you fudged the computer to be blind it would be like a optic bump gone too far
buddy
Active Member
Yes you can
What would be blind is setting it at -1.94 and then still moving it more towards drivers side without relearning TDCO. It would be more advanced, but it wouldnt know exactly how it compares itself to the crank reference.
What would be blind is setting it at -1.94 and then still moving it more towards drivers side without relearning TDCO. It would be more advanced, but it wouldnt know exactly how it compares itself to the crank reference.