I did look at your site as a possible source for a new PMD, but ended up purchasing one locally. It's a new grey Stanadyne and I'll be remote mounting it in a few days, as soon as the extension cable I had to order arrives. My basic plan is to mount it on Walt's heat sink, and to move his heat sink from the intake location he insisted upon to a better location. I'll have to do a little studying of the truck to pick a good location though, since all the "standard" remote mount locations outside the bay are already occupied by other tings on mine. (Lights, horns, sirens, aux oil & transmission coolers, etc.) I'm thinking that getting it into the path of the intake airflow wouldn't be a bad idea. That would give it at least some airflow over it even when sitting just idling, and this truck sits idling a lot.
