Remote oil filter relocation

[bdemutis]

I'm looking for part numbers for a remote oil filter relocation to see if I can get it through advanced auto or Napa just so I can do it today while everything is apart.

 

[JayTheCPA]

Realize that this does not meet the short time requirement, but if you want to wait a bit, here is the AMSOIL parts list for the dual filtration remote:
http://www.thetruckstop.us/forum/threads/95-yukon-rebuild-thread.43813/page-2#post-493846

 

[bdemutis]

I just want a single oil filter but my oil cooler broke it stripped out so I had to order one through pepboys.

 

[schiker]

I have a perma cool dual filter head and Canton Racing adapter at the engine. Its all aftermarket stuff. I doubt any autozone/advanced auto or general box parts store has it on the shelf. Jegs, and/or Summit might have some parts if you are close to one of their retail outlets.

 

[bdemutis]

I have a perma cool dual filter head and Canton Racing adapter at the engine. Its all aftermarket stuff. I doubt any autozone/advanced auto or general box parts store has it on the shelf. Jegs, and/or Summit might have some parts if you are close to one of their retail outlets.

I work at advanced auto we bought out car quest so I can get good parts through them I just need part numbers first. They actually found me an oil filter relocation plate but wanted me to make sure it was the right specs first.

 

[schiker]

Google Canton racing. I don't remember the number but glanced at their website and it was probably 22-592 - SBC/BBC(ALL).

I had to sand/grind the edge of a side to clear the oil pan lip. And you have to take the filter nipple/adapter out of the end of the OE 4x4 adapter and screw it into the block.

The only advantage of the canton racing block adapter is you can index it to best fit. Most others you have to screw them down and tighten for orientation like pipe fittings.