3500 dually
Member
Ok I see different places for the egt, pre turbo and post turbo. I have a place for in my down pipe already but if I decide to go pre tubo what is the best place and do you all have any pictures of this.
Thanks
Thanks
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
location for EGT on a 1995 6.5td
- Thread starter 3500 dually
- Start date
- Staff
- #2
There is a flat spot for it. If you pull the inner fender out, a 30 minute job the first time. You can see it.
I do not have a picture of it.
I do not have a picture of it.
3500 dually
Member
Would that be on the drivers side or passenger side?
- Staff
- #4
same side as the turbo, passenger side. The flat spot faces towards the fender. When you pull off the inner fender it will be looking at you.
- Staff
- #5
No need to pull the fender liner, there is a flat spot on the inside of the exhaust manifold under the turbo as well. I drilled and tapped mine with the engine running and it worked great. Took less than 10 minutes to drill and tap it this way.
http://www.kennedydiesel.com/6265Gaugeinstallation.cfm
http://www.kennedydiesel.com/6265Gaugeinstallation.cfm