I am in the middle of swapping an HX35W on my truck. My questions are about the Oil Feed lines.
I know that the thread pitch on the CHRA for the HX35 series turbos is an M12x1.5 oring fitting. Does the stock 6.5 turbo oil feed line thread into this or did you have to use an adapter?.
Does anyone have a PN for the GM Factory Turbo oil feed line?
Any help is as always appreciated.
I know that the thread pitch on the CHRA for the HX35 series turbos is an M12x1.5 oring fitting. Does the stock 6.5 turbo oil feed line thread into this or did you have to use an adapter?.
Does anyone have a PN for the GM Factory Turbo oil feed line?
Any help is as always appreciated.