• Welcome to The Truck Stop! We see you haven't REGISTERED yet.

    Your truck knowledge is missing!
    • Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
    • We have tons of knowledge here for your diesel truck!
    • Post your own topics and reply to existing threads to help others out!
    • NO ADS! The site is fully functional and ad free!
    CLICK HERE TO REGISTER!

    Problems registering? Click here to contact us!

    Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!

High lift cam ideas

6.2 turbo

Well-Known Member
Messages
1,475
Reaction score
245
Location
pa
This is the cam card from my first cam. It had way more power,and super quick spool up. But had egr from overlap,so it started hard ,and ran off of its own exhaust . Basically it ran horrible untill the turbo spooled.
 

Attachments

  • 0223192115a.jpg
    0223192115a.jpg
    71.9 KB · Views: 13
So I would like to try it again, with like .600 lift , and stock duration. A long time ago I had checked things and it looked like it would work , with different springs obviously. Feel free to post up any cam specs you might have,since one of our cam threads got deleted .
 
I like how the p400 opens exhaust later. I think this is one of Heath's tricks . I bet the exhaust opening point could be 10 degrees later,for more torque. This would dramaticaly change turbo exhaust turbine requirments.
 
Back
Top