Thanks for the offer guys. I was in the hotel when I made the post and called to let Terry know I couldn't make it. Pulling in yesterday it seemed worse than it was, but this morning I was able to isolate the issue. Long story short some NY A-hole decided that instead of making the road flat he was going to put a big speedbump across the road in a patch job. It was easily about 10" or so tall and I only had about a second to react when I saw it. I hit that thing at about 55mph... Front end was fine, but the impact was so bad that as the rear leafs where flexing, the drivers side got locked"forward"(at the schackle), instead of being able to swing backwards as the leafs flexed. Looked worse than it really was. Then not even 50 miles in the cotterpin came off the steering linkage on the drivers side, the nut backed out and the steering crossover hit the pavement. Luckily I was able to pull over with partial control of my steering and get towed to a local shop. The guy there helped me out and hooked me up with a locknut and new cotter pins to fix the issue. Problem solved. (Twin Towing was the places name, if anybody ever needs help in NY call them. They can even go on the Turnpike)
I could have made it to the meet but I wanted to get back so as to avoid additional damage. Then mom called telling me the powers out at home. Long story short with the condition my dad is in he can't go long without heat, so at that point I had to go home and get my house up and running.
The good news is. The truck is fixed(articulated the axle on the way home enough to unlock the shackle and make it swing the proper direction again.) And short of torrential downpours all went well. So how was the meet? Do share!