durallymax
Active Member
- Messages
- 1,929
- Reaction score
- 2
Well I was going to build a set of traction bars but that never happened. So I broke down and bought a set of cal tracs over a month ago. Finally got them in last night.
Took about a half hour to get the leafs out. The front bolt on the drivers side needs to be cut down a little bit so that you can remove it without removing the fuel tank.
spent 2 hours fighting rush hour traffic to get to the spring shop, took them all of 15 minutes to press in the bushings and $30 later I was on my way.
Took about 1hr to put everything back together and adjust it.
My blocks and clamps are also finished now too. Cant wait to try everything out at the next pull, since the pull on sunday was a bit of an embarassment.
Took about a half hour to get the leafs out. The front bolt on the drivers side needs to be cut down a little bit so that you can remove it without removing the fuel tank.
spent 2 hours fighting rush hour traffic to get to the spring shop, took them all of 15 minutes to press in the bushings and $30 later I was on my way.
Took about 1hr to put everything back together and adjust it.
My blocks and clamps are also finished now too. Cant wait to try everything out at the next pull, since the pull on sunday was a bit of an embarassment.