6fiveturbo
better days through better ways
i done some searching, and the filter manager part i got. but what i dont get is..what all do you have to do to the fitting on the top of th IP?
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
feed the beast
- Thread starter 6fiveturbo
- Start date
Turbine Doc
Just Another Diesel Guy
I just added a couple of pics missing from this thread http://www.thetruckstop.us/forum/sh...-Beast-Part-I-amp-Part-II&p=296240#post296240 last pictures on post 135
6fiveturbo
better days through better ways
thanks, what fitting should be screwed in the bottom one? and what size did you drill the side holes to?
Turbine Doc
Just Another Diesel Guy
5/32 IIRC, you need a sharp new colbalt bit, that material is hard stuff, fittings can be acquired from Walking J, mine are custom fittings turned on a lathe from some stainless hex stock.
Walking J also has some pre-drilled IP inlet fittings available if you don't feel like taking on that job yourself.
Walking J also has some pre-drilled IP inlet fittings available if you don't feel like taking on that job yourself.