Hi Everybody,Got a question for ya.Anybody ever try to get the rubber hangers off of the exhaust back by the tailpipe?Im putting a stack pipe on the duelly here & need to get the hangers off the rods there attached to.There is 4 of them I need to take off.I wonder if ya put a little WD-40 on the shaft were it goes into the hole in the rubber mount if they would slide off. The darn things have a head right on the end of the shaft were there through the hole in the hanger.Im gonna try to save the whole thing in case I ever have to put it back on again.I think if ya oiled it up good it would slide off from the shaft.Would need a little persuation though to get it to slide off.Anybody got any other ideas that might work so I dont trash the hangers.Cant see trashing the exhaust that would cost a bundle to replace.:eyebrows: