ak diesel driver
6.5 driver
Anyone know if I can block off the egr on my wifes 2000 Sub w 5.3l and not throw codes??
-
Welcome to The Truck Stop! We see you haven't REGISTERED yet.
Your truck knowledge is missing!
- Registration is FREE , all we need is your birthday and email. (We don't share ANY data with ANYONE)
- We have tons of knowledge here for your diesel truck!
- Post your own topics and reply to existing threads to help others out!
- NO ADS! The site is fully functional and ad free!
Problems registering? Click here to contact us!
Already registered, but need a PASSWORD RESET? CLICK HERE TO RESET YOUR PASSWORD!
egr
- Thread starter ak diesel driver
- Start date
Golddigger
New Member
You might just have to unplug it and put jumpers on the wiring depending on whether it is a normally open or normally closed circuit. They sure dump a lot of soot in the intake! I just did the manifold gaskets on my '99 suburban with a 5.7.
- Staff
- #3
Without tuning it will throw a code. The mass air flow will tell the PCM real quick if the EGR isn't flowing.